AcuRite 02030 Weather Station Instruction Manual

Instruction ManualWeather Stationmodel 00806 / 02030 / 02031

Questions? Contact Customer Support at (877) 221-1252 or visit www.AcuRite.com.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its  entirety and retain it for future reference.Unpacking InstructionsRemove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel it off to remove it.Package Contents

1.  Display with Tabletop stand
2.  Outdoor Sensor
3.  Instruction Manual
4.  Power Adapter

Features & Benefits

OUTDOOR SENSOR

1. Integrated HangerFor easy placement.
2. Wireless Signal IndicatorFlashes when data is being sent to the display unit.
3. Battery Compartment
4.  A-B-C SwitchID code that must match display’s A-B-C switch to ensure units synchronize.
5. Battery Compartment Cover

Features & Benefits

DISPLAY FRONT

1. Outdoor Sensor Signal Strength
2. Current Outdoor TemperatureThe arrow icon indicates the direction temperature is trending.
3.  High Records IndicatorIndicates viewing today’s high records.
4. Current Outdoor HumidityArrow icon indicates the direction humidity is trending.
5. Low Records IndicatorIndicates viewing today’s low records.
6. Current Indoor Humidity
7. Current Indoor Temperature
8.  Moon Phase
9.    auto IconIndicates display is in auto-dimming brightness mode (see page 7).
10.  Day of the Week
11.  Display Low Battery Indicator
12. Date
13.  Intelli-Time® ClockAutomatically updates itself for Daylight Saving Time.
14.  Current Barometric PressureArrow icon indicates the direction pressure is trending.
15. 12 to 24 Hour Weather ForecasterSelf-Calibrating Forecasting pulls data from the outdoor sensor to generate your personal forecast.
16.  Learning Mode IconDisappears after the weather forecast self-calibration is complete.
17.  Sensor Low Battery Indicator
18.  Backlight Button
19. For momentary backlight and dimmer settings.

Features & Benefits

DISPLAY BACK

1.  Integrated Hang HoleFor easy wall mounting.
2. ButtonFor setup preferences and viewing today’s HIGH records.
3.  SET ButtonFor setup preferences.
4. ButtonFor setup preferences and viewing today’s LOW records.
5.  A-B-C SwitchID code that must match sensor’s A-B-C switch to ensure units synchronize.
6.  RESET ButtonFor full reset to factory defaults.
7. Plug-in For Power Adapter
8. Battery Compartment
9. Intelli-Time ® Battery Compartment
10. Battery Compartment Cover

SETUP

Sensor Setup

1. Set the A-B-C SwitchThe A-B-C switch is located inside the battery compartment. It can be set to A, B or C. However, you must select the same letter choices for both the sensor and the display unit in order for the units to synchronize.
2. Install or Replace BatteriesAcuRite recommends high quality alkaline or lithium batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. The sensor requires lithium batteries in low-temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the sensor for temperatures below -4ºF / -20ºC.1. Slide off the battery compartment cover. Take note of the A-B-C switch setting inside the battery compartment.2. Insert 2 x AA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.3. Replace the battery cover.
3.  A-B-C Switchset to match display unit
4.  Install Batteries2 AA batteries

Display Unit Setup

1. Set the A-B-C SwitchLocate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B or C. You must select the same letter choices for both the display unit and the sensor in order for the units to synchronize.1 . A-B-C Switchset to match the sensor2.Plug-in Power Adapter3.Install Backup Batteries(optional) 3 AA batteries

1. Plug Power Adapter into Electrical Outlet
2. Install or Replace Backup Batteries(optional)1. Remove the battery compartment cover.2. Insert 3 x AA alkaline batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.3. Replace the battery cover.

IMPORTANT: Batteries are a backup power source to preserve records in the event of a power outage. The power adapter is the recommended primary power source to enjoy the full functionality of this product.PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment that is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

Intelli-Time® ClockIntelli-Time products are pre-programmed with the correct time and date.Intelli-Time technology instructs the time and date to set themselves. All you need to do is select your Time Zone and Daylight Saving Time preferences. The clock will then automatically set itself and change for Daylight Saving Time.

Set the Time, Date & UnitsPress and release the “SET” button to enter the SETUP MODE. Once in setup mode, the preference you are currently setting will blink on the display.To adjust the currently selected (flashing) item, press and release the “▲” or “▼” buttons (press and HOLD to fast adjust).To save your adjustments, press and release the “SET” button again to adjust the next preference. The preference set order is as follows:

AUTO CHANGE FOR DST?* (YES or NO)TIME ZONE (PST MST CST EST AST HAT AKT)CLOCK HOURCLOCK MINUTECALENDAR MONTHCALENDAR DATECALENDAR YEARTEMPERATURE UNITS (ºF or ºC)BAROMETRIC PRESSURE UNITS (inHg or hPa)*If you live in an area that observes daylight saving time, DST should be set to ON, even if it is not currently Daylight Saving Time.You will automatically exit SETUP MODE if no buttons are pressed for 10seconds. Enter setup mode at any time by pressing the “SET” button.

Display Backlight SettingsThis weather station’s color display features three different lighting settings:High (100%) brightness, Medium (60%) brightness and Low (30%) brightness.Using battery power alone, the backlight is available momentarily for 10 seconds by pressing the Backlight button.When the display is powered with the power adapter, the backlight remains on at 100% brightness. Press the Backlight button once to dim to 60%  brightness; press again to dim to 30%, press a 3rd time to enter AUTO DIM mode.

Placement for Maximum AccuracyAcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product.

Display Unit PlacementPlace the display unit in a dry area free of dirt and dust.The display unit stands upright for tabletop use or is wall-mountable.Outdoor Sensor PlacementSensors must be placed outside to observe outdoor conditions.The sensor is water-resistant and is designed for general outdoor use, however, to extend its life place the sensor in an area protected from direct weather elements.Hang the sensor using the integrated hang holes or hanger, or by using string (not included) to hang it from a suitable location, like a well-covered tree branch. The best location is 4 to 8 feet above the ground with permanent shade and plenty of fresh air to circulate around the sensor.

Important Placement Guidelines

•  To ensure accurate temperature measurement, place units out of direct sunlight and away from any heat sources or vents.
• The display unit and outdoor sensor must be within 330 ft (100 m) of each other.
• To maximize wireless range, place units away from large metallic items, thick walls, metal surfaces, or other objects that may limit wireless communication.
• To prevent wireless interference, place both units at least 3 ft (.9 m) away from electronic devices (TV, computer, microwave, radio, etc.).

Setup is CompleteThe sensor will now synchronize with the display unit. It may take a few minutes for synchronization to complete. Please refer to the troubleshooting section of this manual if anything appears to be functioning improperly.

OPERATION

Using the Weather Station Learning Mode \

Self-Calibrating Forecasting uses a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this point, the self-calibrated pressure is tuned in to your location and the unit is ready for superior weather prediction.

Weather Forecast

Barometric PressureSubtle variations in barometric pressure greatly affect the weather. This weather station displays the current pressure with an arrow icon to indicate the direction the pressure is trending (FALLING, STEADY, or RISING).

Moon PhaseTrack the phases of the moon, conveyed through simple lunar phase icons:

High & Low Records

Today’s high and low records are displayed for indoor and outdoor temperature and humidity. Today’s records automatically clear at 12:00 am-midnight every day. View today’s high or low records by pressing and releasing the “▲” or “▼” buttons. Press and release again to view current readings.To manually clear all of today’s LOW recorded values, press and release the “▼” button to view low records, then press and hold the “▼” button for 2 seconds. Dashes display to confirm you have cleared the LOW records.To manually clear all of today’s HIGH recorded values, press and release the “▲” button to view high records, then press and hold the “▲” button for 2 seconds. Dashes display to confirm you have cleared the HIGH records.

Troubleshooting

Problem	Possible Solution
No outdoor sensorreceptionno bars	If the wireless signal indicator shows no bars:•Relocate the display unit and/or the outdoor sensor. The units must be within 330 ft (100 m) of each other.•Make sure both units are placed at least 3 feet (.9 m) away From electronics that moy interfere with the wireless communication (such as TVs, microwaves, computers, etc).•Use standard alkaline batteries (or lithium batteries in the sensor when the temperature is below .4°F/•20°C). Do not use heavy-duty or rechargeable batteries. NOTE: It may take a few minutes for the display unit and sensor to synchronize after batteries are replaced.
Outdoortemperatureis flashing orshowing dashes	Flashing of the outdoor temperature is generally an indication of wireless interference.1. Bring both the sensor and display unit indoors and remove batteries from each.2. Make sure the ABC•• switch on both units matches.3. Reinstall batteries in the outdoor sensor.4. Reinstall batteries in the display unit.5. Let the units sit within a couple of feet of each other for a few minutes to gain a strong connection. Sometimes changing to a different channel can help.
Inaccurate forecast	•Weather Forecast icon predicts conditions for the next 12 to 24 hours, not current conditions.•Has the Learning Mode icon disappeared from the display unit? Learning Mode must complete before forecast and pressure will be accurate.•Allow the unit to run continuously for 33 days. Battery removal or resetting the display unit will restart Learning Mode. After 14 days, the forecast should be fairly accurate, however, Learning Mode calibrates for a total of 33 days.
Inaccuratetemperatureor humidity	•Make sure both the display unit and sensor are placed out of direct sunlight and away from any heat sources or vents (see page 8).•Make sure both units are positioned away from moisture sources (see page 8).

If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.

Care & Maintenance

Display Unit CareClean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.Outdoor Sensor CareClean with a soft damp cloth. Do not use caustic cleaners or abrasives.CalibrationCalibrate Temperature & HumidityThe indoor/outdoor temperature and humidity readings can be calibrated on the display unit to improve accuracy. Calibration can improve accuracy when sensor placement or environmental factors impact your data accuracy.

1. To access calibration mode, press AND HOLD the “▲”, “SET”, and “▼” buttons (located on the back of the display unit) for at least 5 seconds.
2. Once in calibration mode, the reading you are currently calibrating will show on the display.
3. Press the “▲” or “▼” buttons to calibrate the data value higher or lower from the actual reading.
4.  Press the “SET” button to confirm the calibration adjustment. The “ ” icon will remain illuminated next to calibrated values.
5.  The next adjustable data will be displayed, indicating it is ready to be calibrated. Repeat Steps 2 – 4 to calibrate additional data.After 5 seconds of inactivity, the display will save the adjustments and exit calibration mode. Note: Calibrations will be erased if the display is reset or if batteries are removed and the power adapter is unplugged.

Calibrate Barometric Pressure

The weather station default pressure mode is “AUTO”. In auto mode, the pressure will calibrate itself over a 14 day Learning Mode. Barometric pressure can be manually calibrated:

1.  Press AND HOLD the “SET” button (located on the back of the display unit) for at least 10 seconds to enter manual pressure mode.
2. The un-calibrated pressure will be displayed. Press AND HOLD the “▲”, “▼”, and “SET” buttons for at least 5 seconds.
3.  Press and release the “SET” button until barometric pressure is shown on thedisplay. Use the “▲” or “▼” buttons to calibrate the pressure higher or lower.
4. Press the “SET” button to confirm the calibration adjustment. Note: The “ ” icon will remain illuminated next to the calibrated value.After 5 seconds of inactivity, the display will save your adjustments and exit calibration mode. Note: Calibration will be erased if the display is reset or if batteries are removed and the power adapter is unplugged.To exit manual pressure mode and return to auto mode press and hold the “SET” button for at least 10 seconds.

Replace Intelli-Time Clock BatteryIntelli-Time technology is powered by a pre-installed coin-cell battery that stores the time and date settings. The battery has a shelf life of several years. Time and date will need to be entered after replacing the Intelli-Time battery. To replace the Intelli-Time battery:

1.  Locate the coin cell battery compartment door in the battery compartment of the display unit. Unscrew and remove the compartment cover.
2.  Insert 1 x CR2032 coin cell battery into the battery compartment, as shown. Install battery with “+” positive terminal facing OUT.
3. Screw in the battery cover.

WARNING: THIS PRODUCT CONTAINS A BUTTON-CELL BATTERY. IF SWALLOWED, IT~ COULD CAUSE SEVERE INJURY OR DEATH IN JUST 2 HOURS. SEEK MEDICAL ATTENTION IMMEDIATELY IF INGESTED.

Specifications

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

• This device may NOT cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip­ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Conned the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

• This device may not cause interference, and
• This device must accept any interference received, including interference that may cause undesired operation of the device.

Customer Support

AcuRite customer support is committed to providing you with best-in-class service. For assistance, please have the model number of this product available and contact us in any of the following ways:

(877) 221-1252 

Visit us at www.AcuRite.com

► Installation Videos► Register your Product► Instruction Manuals► Support User Forum► Replacement Parts► Submit Feedback & Ideas

Limited 1 Year Warranty

AcuRite is a wholly-owned subsidiary of Chaney Instrument Company. For purchases of AcuRite products, AcuRite provides the benefits and services set forth herein. For purchases of Chaney products, Chaney provides the benefits and services set forth herein.We warrant that all products we manufacture under this warranty are of good material and workmanship and, when properly installed and operated, will be free of defects for a period of one year from the date of purchase.Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by us, and at our sole option, be repaired or replaced by us. Transportation costs and charges for returned goods shall be paid for by the purchaser.We hereby disclaim all responsibility for such transportation costs and charges. This warranty will not be breached, and we will give no credit for products that have received normal wear and tear not affecting the functionality of the product, been damaged (including by acts of nature), tampered, abused, improperly installed, or repaired or altered by others than our authorized representatives.Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). If we determine that repair or replacement is not feasible, we may, at our option, refund the amount of the original purchase priceTHE ABOVE-DESCRIBED WARRANTY IS THE SOLE WARRANTY FOR THE PRODUCTS AND IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER WARRANTIES OTHER THAN THE EXPRESS WARRANTY SET FORTH HEREIN ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY OF MERCHANTABILITY ND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

We expressly disclaim all liability for special, consequential, or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.We further disclaim liability from personal injury relating to its products to the extent permitted by law. By acceptance of any of our products, the purchaser assumes all liability for the consequences arising from their use or misuse. No person, firm or corporation is authorized to bind us to any other obligation or liability in connection with the sale of our products.Furthermore, no person, firm or corporation is authorized to modify or waive the terms of this warranty unless done in writing and signed by a duly authorized agent of ours.In no case shall our liability for any claim relating to our products, your purchase, or your use thereof, exceed the original purchase price paid for the product.Applicability of PolicyThis Return, Refund, and Warranty Policy apply only to purchases made in the United States and Canada. For purchases made in a country other than the United States or Canada, please consult the policies applicable to the country in which you made your purchase.Additionally, this Policy applies only to the original purchaser of our products. We do cannot and do not offer any return, refund, or warranty services if you buy products used or from resale sites such as eBay or Craigslist.Governing LawThis Return, Refund, and Warranty Policy are governed by the laws of the United States and the State of Wisconsin. Any dispute relating to this Policy shall be brought exclusively in the federal or state courts having jurisdiction in Walworth County, Wisconsin; and purchaser consents to jurisdiction within the State of Wisconsin.

It’s more than accurate, it’s AcuRite offers an extensive assortment of precision instruments,  designed to provide you with information you can depend on to Plan your day with confidence™.

www.AcuRite.comPrinted in China00806SBDI INST 021216

©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology.Visit www.AcuRite.com/patents for details.

References

• 
  AcuRite Weather Monitoring | #1 Weather Station Brand in North America
• 
  Patented Technology | AcuRite
• 
  Icon Definitions and Terminology | AcuRite