ACURITE Multicolor LED Clock with Indoor Temperature and Data Instruction Manual

ACURITE Multicolor LED Clock with Indoor Temperature and Data Instruction Manual

Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.

Unpacking Instructions

Remove the protective film that is applied to the LED screen prior to using this product. Locate the tab and peel off to remove.

Package Contents

  1. Digital Clock
  2. Power Adapter
  3. Instruction Manual

Features & Benefits

  1. Clock
  2. AM/PM Indicator
  3. Indoor Temperature
  4. Day of The Week
  5. Date
  6. Color Selection ButtonPress and release to cycle through available colors. Press and hold to turn on/off auto-cycle mode.
  7. Integrated KeyholesFor easy wall mounting.
  8. Fold-Out Stand
  9. Battery Compartment Cover
  10. Power Adapter
  11. Built-In Cord StorageSecures excess cord.
  12. Battery Compartment
  13. ButtonFor setup preferences.
  14. SET ButtonFor setup preferences.
  15. ButtonFor setup preferences.


  1. Install or Replace Backup Batteries (Optional)
    1. Remove the battery compartment cover.
    2. Insert 2 x AA alkaline batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.
    3. Replace the battery cover.
  2. Plug in Power AdapterPlug the power adapter into a power outlet.


  1. Install Backup Batteries (Optional)2 AA Batteries

IMPORTANT: Batteries are a backup power source to preserve records in the event of a power outage.Power adapter is required as the power source of this product.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak.DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

Set the Time & Date

Press and release the “SET” button, located on the back of the clock, to enter SET MODE. Once in SET MODE the preference you are currently setting will blink on the clock.

To adjust the currently selected (flashing) item, press and release the “ ” or “ “ buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the “SET” button to adjust the next preference.The preference set order is as follows:


You will automatically exit SET MODE if no buttons are pressed for 10 seconds. Enter SETMODE at any time by pressing AND HOLDING the “SET” button.

* If you live in an area that observes daylight saving time, DST should be set to ON.

Adjust the Backlight 

This clock’s color display features 5 different lighting settings: 100%, 75%, 50%, 25%, and 10%. When the display is powered with the power adapter, the backlight remains on at 100% brightness by default. Manually adjust the backlight brightness by pressing and releasing the ” ” or ” ” buttons when not in SET MODE.

Set the ColorThis clock’s display features 6 different color settings. Choose between white, blue, violet, magenta, red, or green, or set to auto-cycle to fit your preference. In auto-cycle mode, the display automatically cycles through all available colors, changing every minute. Press and release the Color Selection button on the front of the display to select your desired color.Press and hold to turn on/off auto-cycle mode.

Care & Maintenance

Clock CareClean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.



32ºF to 122ºF; 0ºC to 50ºC


9-ft. 9V, 1.0A power adapter (included)
2 x AA alkaline batteries (for backup; optional)

FCC InformationThis device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

  1. This device may NOT cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.This device complies with Industry Canada licence-exempt RSS standard(s).

Customer Support

AcuRite customer support is committed to providing you with best-in-class service. For assistance, please have the model number of this product available and contact us in any of the following ways:

Chat with our support team at Email us at [email protected]

► Installation Videos► Register your Product► Instruction Manuals► Support User Forum► Replacement Parts► Submit Feedback & Ideas

Warranty Info

Limited 1-Year Warranty

AcuRite is a wholly owned subsidiary of Chaney Instrument Company. For purchases of AcuRite products, AcuRite provides the benefits and services set forth herein.

For purchases of Chaney products, Chaney provides the benefits and services set forth herein. We warrant that all products we manufacture under this warranty are of good material and workmanship and, when properly installed and operated, will be free of defects for a period of one year from the date of purchase.

Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by us, and at our sole option, be repaired or replaced by us. Transportation costs and charges for returned goods shall be paid for by the purchaser. We hereby disclaim all responsibility for such transportation costs and charges.This warranty will not be breached, and we will give no credit for products which have received normal wear and tear not affecting the functionality of the product, been damaged (including by acts of nature), tampered, abused, improperly installed, or repaired or altered by others than our authorized representatives.

Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). If we determine that repairor replacement is not feasible, we may, at our option, refund the amount of the original purchase price.


We expressly disclaim all liability for special, consequential, or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

We further disclaim liability from personal injury relating to its products to the extent permitted by law. By acceptance of any of our products, the purchaser assumes all liability for the consequences arising from their use or misuse. No person, firm or corporation is authorized to bind us to any other obligation or liability in connection with the sale of our products. Furthermore, no person, firm or corporation is authorized to modify or waive the terms of this warranty unless done in writing and signed by a duly authorized agent of ours.

In no case shall our liability for any claim relating to our products, your purchase or your use thereof, exceed the original purchase price paid for the product.

Applicability of PolicyThis Return, Refund, and Warranty Policy applies only to purchases made in the United States and Canada. For purchases made in a country other than the United States or Canada, please consult the policies applicable to the country in which you made your purchase. Additionally, this Policy applies only to the original purchaser of our products. We do cannot and do not offer any return, refund, or warranty services if you buy products used or from resale sites such as eBay or Craigslist.

Governing LawThis Return, Refund, and Warranty Policy is governed by the laws of the United States and the State of Wisconsin. Any dispute relating to this Policy shall be brought exclusively in the federal or State courts having jurisdiction in Walworth County, Wisconsin; and purchaser consents to jurisdiction within the State of Wisconsin.


[xyz-ips snippet=”download-snippet”]