AFTERSHOKZ OpenMove Wireless Open-Ear Headphone User Guide

AFTERSHOKZ OpenMove Wireless Open-Ear Headphone

AFTERSHOKZ OpenMove Wireless Open-Ear Headphone

OVERVIEW

How to Set Up Open Move

  1.  ChargeCharge the headphones with the included USB-C charging cable. The LED indicator will change from red to blue when charging is complete.
  2.  PairBegin with your headphones powered off. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
  3. ConnectOpen your device’s Bluetooth®menu and select “OpenMove by AfterShokz.” Audrey will say “connected” and the LED indicator will flash blue one time.Let us take care of you! Protect your headphones against defects.Make sure to register your OpenMove at Aftershokz.com

Multifunction Button (A)

Function Action Prompt / “Audrey Says™”
Play/pause music Click once One beep
Skip to the next song Double-click

 

while music is playing

 One beep
Skip to the previous song Triple-click while music is playing One beep
Switch language Double-click while on pairing English
Answer call Click once Two beeps
End call Click once One beep
Answer call waiting and hang up on current caller Press and hold for 2 seconds One beep
Reject a call Press and hold for 2 seconds Two beeps
Activate device’s voice assistant Press and hold for 2 seconds Device beep
Redial last number Double-click (when idle) “Redial last number”

Volume+ / Power Button (B); Volume- Button (C)

Function Action Prompt / “Audrey Says™”
Power on Press and hold volume+ for 2 seconds “Welcome to AfterShokz”
Power off Press and hold volume+ for 3 seconds “Power off”
Mute Press and hold both buttons for 2 seconds while on a call “Mute on” or “Mute off”
Switch EQ Press and hold both buttons for 3 seconds while music is playing “Standard mode / Vocal booster mode / Earplug mode”

 

 
Check battery status Click the volume+ or volume button while music is paused “Battery high/Battery medium/ Battery low/Charge me”
 

 

Adjust volume

 Click the volume+ or volume- button to adjust volume while music is playing One beep

Specifications

Model number AS660 Frequency response Frequency response
Speaker type Bone conduction transducer Speaker sensitivity Speaker sensitivity
Bluetooth® version Bluetooth® v5.0 Microphone sensitivity -40 ± 2dB
Wireless range 10 m Frequency band 2402 – 2480MHz
Battery Rechargeable Li-Polymer battery Battery capacity 135 mAh
Continuous play Up to 6 hours Standby time Up to 10 days
Charge time 2 hours Charge voltage 5.25V ± 5%
Charge type USB-C Speaker impedance 8.0 ± 0.5ohm
Water resistance IP55 Maximum RF output power 4dBm
Weight 29 g Warranty 2 years
Compatible profiles HSP, HFP, A2DP AND AVRCP

LED Indicator

Solid red Charging
Solid blue Charging complete
Flashes red and blue Pairing mode
Flashes blue Incoming call
Flashes red every 2 minutes Low battery

Multipoint Pairing

Multipoint pairing allows OpenMove to be connected to two devices at once, allowing users to seamlessly transition between the two.

  1. Begin with your headphones powered off.
  2. Press and hold volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
  3. Press and hold the multifunction button and volume+ button for 3 seconds. Audrey says “multipoint enabled”.
  4. Open your first device’s Bluetooth®menu and select “OpenMove by AfterShokz.” Audrey says “connected”.
  5.  Turn your headphones off.
  6. Re-enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
  7.  Open your second device’s Bluetooth®menu and select “OpenMove by AfterShokz.” Audrey says “connected”.
  8.  Turn your headphones off.
  9. Turn your headphones on. Your headphones are now connected to both devices. Audrey says “connected” and “device 2 connected”.
  10. To turn off multipoint pairing: Press and hold the multifunction and volume – buttons for 3 seconds when pairing. Audrey says”multipoint disabled”.

More information: bit.ly/aftershokzpairing

How to Reset Your Headphones

  1. Begin with your headphones powered off.
  2. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
  3. Press and hold the multifunction button, volume+ button, and volume- button(all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations.
  4. Turn your headphones off. OpenMove is now reset and can be re-paired to your device.

Optional Accessories

Earplugs (D)Use earplugs with headphones in environments where it is safe to block out ambient noise, such as on a train or airplane.

  1.  Roll earplugs firmly between fingers and place in ears.
  2. To adjust EQ settings for earplugs, press and hold volume+ and volume- buttons simultaneously while music is playing. Continue through options until “earplug mode.”
  3. Switch EQ to other settings when you take out the earplugs.

Manufacturer

AfterShokz LLC3200 Gracie Kiltz Lane, 4th floor, Austin, TX 78758

 

report this ad

8000500039(A0)

Pdf Download Resources

  •  [pdf] User Guide
  • Read more:

FAQ’S

My headphones won’t charge. What should I do?

Make sure your headphones are fully charged. If they still won’t charge, please contact us at 1-800-843-4287 and we will be happy to assist you.

My headphones won’t pair. What should I do?

Make sure your headphones are powered off. If they still won’t pair, please contact us at 1-800-843-4287 and we will be happy to assist you.

My headphones won’t connect to my device. What should I do?

Make sure your device is in pairing mode and that the OpenMove is powered off. If they still won’t connect, please contact us at 1-800-843-4287 and we will be happy to assist you.

Are AfterShokz OpenMove waterproof?

OpenMove are rated IP55 in terms of waterproofness, therefore, they can be exposed to light sweat/ moisture and dust but we do not recommend showering with them.

Can I wear AfterShokz in shower?

No, they are water-resistant but not waterproof. You could and almost definitely would damage these in the shower. They might work in a bath if you’re not going to dunk your head.

Can I use AfterShokz with Iphone?

Yes, I have two Aftershokz headphones, including the OpenComm headset, and they both pair easily with my Apple iphone and mini ipad.

Can AfterShokz be used to make/take calls?

Yes. All our wireless models are equipped with dual noise canceling microphones for making and taking phone calls when paired with a smartphone or other Bluetooth-enabled device.

Can you sleep with AfterShokz?

Believe it or not, many people use their AfterShokz headphones to sleep! Turn out the lights, throw on some white noise, and get comfy. If you sleep with a snoring partner or you have pets running around that could disturb your shut-eye, your earplugs will definitely come in handy!

Does AfterShokz turn off automatically?

The right earpiece features two buttons to control the volume. The volume-up button also doubles as the power button. Long-press it to turn the device on and off—which you’ll want to remember, since the headphones don’t turn themselves off automatically.

Where is mute button on AfterShokz?

The volume up and down buttons. Pressing and holding the volume up turns the headset on or off. Pressing both for two seconds will mute/unmute the mic when on a call.

How do you check an AfterShokz battery?

You can check the battery status by powering on your headphones and clicking volume+ or volume- while no music is playing. Audrey will say “Battery High,” “Battery Medium,” “Battery Low” or “Charge Me.”

What does purple light mean on AfterShokz?

Purple light means it’s dead.

How do you reset Bluetooth headphones?

Unplug the headphones from their charging port. Press and hold the power button for 10 seconds. Wait for the LED light to blink to indicate that you have successfully reset your headphones.

VIDEO

AFTERSHOKZ OpenMove Wireless Open-Ear Headphonewww://uk.shokz.com/

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , ,