TWS Bluetooth Earphone AG-TWS08R User Manual
FCC ID: 2AX2R-TWS08R
Package contents
Part name
Power/Charging
Charging the charging case:
Connect the accessory USB charging cable(C) connector to the USB port on the charging case and connect the USB(A) connector to an electrical appliance or adapter with the same shape of connector and the internal battery within the charging case will begin to charge. While charging, the LED indicator light will slowly flash green. Once charging has been completed, the LED indicator will light up green.
Charging the earphones:
Insert the earphone units into the charging case and they will begin to charge.
Turning on the earphones
After charging, remove the earphones from the charging case and the power will automatically switch ON, (When the LED indicator lights up green for 1 second, the power is ON.)
When the power is OFF, tap the touch control panel one time and the power will turn ON.
Turning off the earphones
Touch and hold the touch control panel for about 3 seconds until two types of beep sound emanate, and the power will switch OFF.
When the charging case is adequately charged, returning the earphones to the charging case will automatically switch the power OFF and charging will begin.
Performing device pairing
To connect to your smartphone or other device initially, it is necessary to perform pairing. For devices which have already completed pairing, a connection will automatically be established the next time the power is switched ON.
The first time the earphones are used:
- Remove the left and right earphones from the charging case, and they will automatically be in pairing mode. (The LED indicator on the left side earphone flashes between green and red.)
- Switch the Bluetooth function on the smartphone or other device ON and select [TWS08R_L] once it appears on the display.
- A [Bluetooth pairing request] from the other side earphone will appear on the display, so please select [pairing] or [OK]. (The display varies depending on the smartphone or other device to which it is connected.) When the following appears on the display of the device being connected, left/right pairing has been completed.
To reestablish pairing or to perform pairing with a second or later device:
- Remove the earphones from the charging case and the LED indicator will light up green for 1 second as the power automatically switches ON.
- Tap the touch control panel on either side of the earphones to switch to pairing mode. (LED indicator flashes between green and red.)
- Switch the Bluetooth function on the smartphone or other device ON, and select either [TWS08R_L] or [TWS08R_R] once it appears on the display.
- A [Bluetooth Pairing Request] from the other side earphone will appear on the display, so please select [Pairing] or [OK]. (Varies depending on the smartphone or other device to which it is being connected.) Left and right pairing has been completed when any of the messages below have been displayed.
* Before performing pairing with a new device, please disconnect the device to which it has already been paired or switch the Bluetooth function OFF on the device to which it has already been paired.
Operation of Touch Control Panel
* Depending on the device to which connected, this function may not be available.
Reset Method
When pairing has not been successfully completed, the earphones will be reset by the following procedure. Once the reset has been completed, please attempt another pairing operation.
- Insert the left and right earphones into an adequately charged charging case then touch and hold the touch control panel on both sides simultaneously for 10 or more seconds and the LED indicator will first turn off then light up in green.
- Next, remove the left and right earphone modules, and the LED indicator will flash green as pairing is performed between the left and right earphones.
- After a certain amount of time, the earphones will automatically switch to pairing mode with the smartphone or other device. The LED indicator on the left earphone module flashes between green and red. In this situation, the reset has been completed.
About the ear tips
When bass is difficult to hear and high range sound jars the ear, there is a possibility that the ear tip fit is not appropriate. In order to enjoy music in accordance with the design of the earphone, it is important that the ear tip fits properly and there is a means of sealing the ear canal. In order to achieve the proper fit, please try the following method:
- Please try various sizes, not just M size.
- In case of small ears, please try not just S and SS size, conversely try larger sizes as well.
- Even if the size of the ear canal is the same, the left and right ears may be different, so please also try different sizes for left and right.
Points of Caution
- There is a risk of permanent hearing loss from extended use at excessive sound volumes. Please do not exceed 40 hours use per week at a sound volume of 80 dB(A) or 5 hours per week at a volume of 89 dB(A).
- To avoid electromagnetic interference, please refrain from use in places in which the use of electronic devices is prohibited.
- If you are using a pacemaker or other electronic medical device, please consult your physician before using this product.
- This product contains small parts that may be hazardous to children, so please store in a place that is out of the reach of children.
- Please do not subject to strong shocks or apply excessive force. Damage from abnormal use is not covered by the warranty. To prevent damage, please store the earphones inside the case in an appropriate location.
- Causing damage to the circuits may result in fire or electrical shock, so please do not attempt to disassemble this product.
- Please keep this product away from water or other liquids that may cause shorts or other damage.
- Please do not attempt to repair this product yourself as unauthorized attempts at repair may void the product warranty.
- Never use earphones when operating a bicycle, automobile, motorcycle or other motor vehicle as this is a cause of traffic accidents and there is a risk of serious consequences. Even when not driving, please do not use at railroad crossings, traffic intersections and other environments where there is a danger in the inability to hear surrounding sounds.
- This product may be damaged if it is placed in locations where the environment is subject to excessive direct sunlight, humidity, dust and other contaminants.
Troubleshooting: When you think, “Is it broken?”
Maintenance
Gently remove any build-up from the mesh filter with the tip of a toothpick. Please take care to ensure that no foreign particles fall inside when doing so.
Warranty and after service
The warranty for this product is valid for 1 year from the date of purchase. During the warranty period, we will repair the product based on the provisions below. The warranty is only valid in the country in which the product was purchased. In the event that you need after sales service or support on the purchased product, please contact the store you made the purchase from. If your purchase was made from Amazon, kindly contact the customer service which can be found on Amazon website.
- During the warranty period, we will repair the product free of charge if the product failed even though it was used in accordance with the instructions in the user’s manual and the point of caution sections.
- In the following cases, repairs to the product will be subject to a fee even during the warranty period:
- The necessary documentation noted in the warranty card is not complete.
- The product is identified to be modified, disassembled, or repaired by a third party or customer other than our company or our authorized organizations.
- The earphones were subjected to a strong impact or were allowed to get wet. Product failure resulting from an excessive use of force on the product.
- Failure of the product or damage caused as a result of fire, earthquake, storm or flood damage, lightning strike or other natural disaster.
- Repair of scratches on the surface of the housing or repair of the housing itself.
Manufacturer:
ShenZhen XingMan Smarttech Corporation
Our TWS Bluetooth Earphone does not have enough space to print the product names, model, trademark, MIC ID and LOGO on the product itself, thus we locate them on product packaging and product user manual.
* There is a possibility of a change in the specification, so please scan this QR code for the latest user’s manual.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
report this ad(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
[xyz-ips snippet=”download-snippet”]