AGPTEK CN16G Electric Nail Drill Pen 6 Bits User Manual

SKU: CN16GElectric Nail Drill Pen 6 Bits

Features

Light-weight design for precise operation Suitable for Professional salon, Studio or Home Use Suitable for pedicure and manicure Quiet and SmoothPortable & Easy to carry outMulti-use: carving, engraving, routing, grinding, sharpening, sanding, polishing, drilling and so onThe nail file can be used for natural nails as well as artificial nails

Specification:

Power: single-phase, 110V/60Hz, double insulatedPRM: 3000-13000Collet type: 2.4mmColor: Pink.

Operation

  1. This tool is design for carver, engrave, rout, grind, and sharpen, sand, polish, drill and more.
  2.  Unplug the tool from the electrical outlet before loading a bit.
  3. Press the shaft lock button, rotate the collet nut anticlockwise (but do not take the nut out) ， insert the bit, press the shaft lock button, and tighten the collet clockwise securely. But avoid excess tightening of the collet nut in case of damage in the nut.
  4. Slide the on/off switch to find the speed needed between 3000-13,000RPM. Slide the switch to the black dot for a complete stop.
  5. When finished, unplug the tool, take the bit out and store the set in a dry place.

Safety Rules:

  1.  Always unplug the tool when you change accessory/collet or finish using the machine.
  2. Do not engage the shaft lock button while the tool is running.
  3. Never use a damaged bit.
  4. The machine is not waterproof. Please keep away from water. If the machine falls into water, unplug it immediately and do not touch the water.

AGPTEK CN16G Electric Nail Drill Pen 6 Bits User Manual – AGPTEK CN16G Electric Nail Drill Pen 6 Bits User Manual –

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,