AGPTEK SP11 Bluetooth 5.0 Speaker User Manual

AGPTEK SP11 Bluetooth 5.0 Speaker User Manual

Thanks for choosing this product. Please read this [user manual] carefully before use and keep it for future reference. Any problem about this product, please contact us at [email protected].

At a Glance

  • A. Answer/End Call
  • B. Volume Adjustment
  • C. Speaker D. USB C Port
  • E. Microphone
  • F. Power Switch
  • G. Clip

How to Use

CHARGE

Built-in rechargeable polymer battery, please fully charge the speaker for first use (Charging time about 2 hours).

Important Tips:

  1. If the hands-free function is not used for a long time or the battery has run down, the LED indicator will have a short delay.
  2. During charging, the LED indicator lights up red, and the LED indicator turns off after fully charging.
POWER ON/OFF
  • Power On. Slide the power switch located on the side of the unit to ON position.
  • Power Off. Slide the power switch located on the side of the unit to OFF position.

NOTE: After turning on the speaker, if there is no Bluetooth device to pair or connect within 5 minutes, it will enter the deep sleep state; Slide the power switch again to turn on the speaker.

PAIR & CONNECT

The speaker allows connecting 2 mobile phones with Bluetooth function simultaneously. If only pair and connect 1 mobile phone, just connect the device once. The pairing steps are as follows:

Connect To 1 Mobile Phone

  1. Keep the distance between the mobile phone and the speaker within 3m (for pairing only).
  2. Turn on the speaker, and then a voice prompt will be heard, which means that the speaker is in pairing mode.
  3. Enable the Bluetooth of mobile phone to search for the Bluetooth devices (More details refer to the using instruction of mobile phone).
  4. After finishing the search, select the speaker named “SP11“ from the device list displayed, and tap it to pair. If your phone asks for a password, enter “0000” (four zeros). After a successful pairing, a voice prompt “DiDa” will be heard. At this point, the hand free function is enabled, so you can answer or end a call by the function.

NOTE:

  • If the speaker is not successfully paired within 2 minutes after entering the pairing state, please turn off the speaker, then repeat the above steps for pairing again.
  • After a successful pairing, the speaker will memorize each Bluetooth device (Up to 8 devices). Therefore, no pairing will be needed next use. When the 8 Bluetooth devices that have been paired are within the Bluetooth effective range of the speaker, the speaker will select the last connected Bluetooth device to connect. If the last connected Bluetooth device is not in the working range, then the second-to-last one will be selected, and so on.

Connect To 2 Mobile Phones

  1. Disable the Bluetooth of mobile phone ❶.
  2. Enable Bluetooth of mobile phone ❷, and connect to the speaker.
  3. Turn on the Bluetooth of mobile phone ❶ once again, the speaker will connect with the phone’s Bluetooth automatically.
CONTROL

Hand-free Call

  1. Answer/Reject a call. When receiving a phone call, answer the call by short pressing the button . Long press it to reject the call.
  2. End a call. During calling, short press the button to end a call.
  3. Redial the last call. Double click the button when the speaker is working but not calling.
  4. Switch hands-free call to phone call. During hand-free calling, long press the button for 3s, the call will be switched to your mobile phone, not the speaker. During phone calling, long press it for 3s to switch the call to the speaker.
  5. Volume adjustment. When calling or playing music, long press the button – to decrease the volume; long press the button + to increase the volume, hearing a voice prompt “DuDu” to indicate at full volume.

Music

  1. When playing music, short press the button to play or pause the music.
  2. When playing music, short press the button +/- to go to next or last song.

Activate Voice Assistant.

report this ad

In non-calling state, long press to activate Siri or Google Assistant for voice operation.

Specifications

  • Bluetooth (BT): Bluetooth 5.0+EDR
  • BT effective range: 0-10 meters
  • Working frequency: ISM 2.4 GHz-2.48GHz
  • Battery: 3.7V, 600mAh
  • Power output: DC 5V, 300mAh
  • Charging time: 2 hrs
  • Music playing time: 6-8 hrs
  • Hands-free calling time: 10-12 hrs

Safety

  • Keep the speaker away from wet, humid, to extremely high or low temperature environments.
  • Don’t use any corrosive liquids to wipe or clean the speaker.
  • Keep the speaker away from any sharp object to avoid scratches or damage.
  • Do not disassemble the speaker.
  • Keep the speaker in a dry environment when not in use.

 

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , ,