Aigital 1200Mbps WiFi ExtenderUser Manual
What’s the Function of this WiFi Extender?— Extend your home existing wifi range to larger areas to achieve signal full coverage.— Dual Band, can extend both 5G network and 2.4G network.
How to Set Up this WiFi Extender?
- Plug this wifi extender into socket (Note: No need connect any Ethernet Cable to your home original router)
- On phone / computer connect to the wifi signal “WiFi-2.4G-xxxx” or “WiFi-5G-xxxx”. (Note: wifi-2.4G-xxxx and wifi-5G-xxxx are open wifi, no need password to connect, after connected, it shows No Internet Access)
- Open browser and type in IP address 192.168.188.1 in the address bar. Click “Go”. (Note: If your phone prompts you that current WLAN network is unavailable and let you switch, Please Click “NO” or “CANCEL”)
- Type in login password: admin
- Scan and select your home wifi (Note: Please make sure your home wifi signal can reach to this wifi extender)
- Type home wifi’s password in the Wireless Password blank (Note: Please make sure the password must be typed correctly, it’s the wifi password in step 5 you selected)
- Set new WiFi Extender’s SSID and Password, click “Next” (Note: You can set any wifi name and password for 5G and 2.4G network)
- Have a check, it will be your wifi extender’s wifi name and password, if no problem, click “Start Connect”.
- Wait. Close the page or browser, then re-search the new wifi and connect to it.
Want to have Wired Connection? See below:
If you want to have wired connection, please just connect this wifi extender and your wired device via Ethernet cable and get access into internet directly. It has 2 LAN ports, you can connect at least 2 wired devices.
Forget the password or failed setup? Reset itPress and hold the reset button for 10 seconds,”WiFi-2.4G-xxxx” or “WiFi-5G-xxxx” will become open and unsecured again.
More Inquiries? Contact with us, we are here:
Email: Manufacturer Website: aigital.cn Skype: [email protected]
References
[xyz-ips snippet=”download-snippet”]