Wireless Earbuds Ailun-E5
Product Information
Packing List
 Charging Case x1 |
 Type-C Cable x1 |
 Manual x1 |
 Wireless Earbuds x2 |
 S/ M/ L Eartips x3 pairs |
Tip: The ear tips in medium size have been installed on the earbuds in advance.
Important Reminder!
Please take the following steps before using the earbuds for the first time:
Step 1: Peel off the blue insulating films on the charging contacts of the earbuds
Step 2: Put the earbuds back into the charging case.
Step 3: CLOSE THE LID and let the earbuds charge for about 10 minutes.
Wearing
- Choose a pair of earbuds that fit your ears
- Insert the earbud into your ear and rotate it backward to fit comfortably.
Voice assistant
- Three click L/R earbud MFB, Release your finger to activate your voice assistant;
- The corresponding voice assistant screen pops up, and you can easily execute commands.
Power On
Manual operation:When the earbud is in power-off status, please touch and hold the touch button on the left/right earbud for 2 seconds to power on. You will hear a voice prompt of “Power on” from the earbud, then the red and white lights on the earbuds will be ON for 1 second at the same time.
Automatic operation:Open the charging case and take the earbud(s) out.
Note:When the earbuds are being charged in the charging case and the case is out of power, the earbuds will turn on automatically
Pairing
- Turn on your phone’s Bluetooth.
- Open the charging case and take out the earbuds.
- Select “Ailing-ES” pairing, pairing the primary earbud red and white lights alternately flash, the secondary earbud white light flashes once in 55, pairing success beep “Connected”.
Reminder:
- Earbuds Turn On will pair Land R earbuds automatically, LR pairing successful will prompt voice “Ding Dong”;
- If the earbud has been connected to the mobile phone, the earbud will be connected to the mobile phone first when the earbud is turned on. If the connection fails, it will automatically enter the mobile phone pairing state.
- When pairing, the primary earbud red and white lights alternately flash, the secondary earbud white light flashes once in 55, pairing success beep “Connected”.
Incoming Call
Answer/hang up a callClick the MFB button on the Lor R earbud, the tone “Du”.
Reject a callLong press the M FB button on the Lor R earbud for 2 seconds, the tone “Du” (in the incoming call state)
Music
Play/Pause/Previous/Next songPause/play: Click the MFB button on the Lor R earbud (some phones need to turn on the Media player) Previous song: Double click the left earbud M FB button (if you only use the left earbud, the earbud can only play the previous song) Next song: Double click the right earbud MFB button (if only the right earbud is used, the earbud can only play the next song)
Cautions:1. If music is playing when you call, the earbud will automatically play music after the call ends.2. If the voice assistant is used, the music will be paused.
Charging
Insert one end of the adapted data cable into the charging port of the charging compartment, and connect the other end to the computer/adapter/mobile power supply for charging
Charge Charging Case
Method 1:
Method 2:
Charging the Case & LED Indicators
Charging status of the charging case: the LED white light of the charging compartment flashes, and when fully charged the white light always on. Charging case low battery state: when the first LED light has 0%-5% power remaining, and when the white light flashes once per second, it needs to be charged in time.
Charging state: earbud red light is always on, the red light goes off after a full charge.Low battery status: red light flashes 300ms on 300ms off 5 seconds a cycle, once per minute voice prompt “Please charge”.
Power Off
Manual operation:
- Tap and hold the touch button on the left/right earbud for 5 seconds.
- After the earbuds are closed, put them back in the charging case and close the cover.
Automatic operation:
- Put the earbud(s) back into the charging case and close the case.
- Earbud(s) automatically turns off (and enters charging mode).
Reset the earbuds/clear all pairing information on the earbudsTurn off the earbuds and hold the touch buttons of the left and right earbuds for 10 second.
Specifications
| Model | Ailun-ES |
| Bluetooth Version | V5.0 |
| Battery | 40mAh (each earbud) 400mAh charging case) |
| Charging Time | Approximately 1.5 hour (earbuds)2.5 hours (charging case) |
| Input | 5V= lA |
| Playtime (varies by volume level and content) | 4hours (Up to 16 hours with the charging case) |
| Bluetooth Range | 10m / 33ft |
| Frequency range | 20Hz~20KHz |
| Sensitivity | 102±3dB |
Website: www.ailun.com
E-mail: [email protected]
[xyz-ips snippet=”download-snippet”]