Airdopes boAt Twin Wireless Earbuds User Manual

Airdopes boAt Twin Wireless Earbuds

In the box

  1. 1x Pair of TWS Earbuds
  2. 1x Charging Case
  3. 2x Pairs of Additional Earmuffs
  4. 1x Type-C Charging Cable
  5. 1x User Manual
  6. 1x Warranty Card
  7. 1x Catalogue

Power On (First Time User)

Step 1: To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Our IWP™ (Insta Wake N’ Pair) Technology enables the earbuds to power on automatically, get connected and enter into the connection mode OR Long touch the CTC on both earbuds for 3 seconds to manually power on the earbuds

Step 2: Both the earbuds will automatically pair with each other. The earbuds will enter into the Connection Mode, indicated by green LED flashes Connection Mode

Step 3: Turn on the Bluetooth functionality on your phone/media device and scan

Step 4: Search for ‘Airdopes 621’ and pair accordingly.

Congratulations! Your earbuds are now connected successfully via Bluetooth

Note:

  • Pairing mode lasts for 5 minutes. If the pairing time is missed then you will need to reconnect the ear-buds and follow the above mentioned procedure
  • Airdopes 621 remembers previously connected devices; once switched on, the ear-buds automatically reconnect to the previously connected devices

Single Earbud Usage

Step 1: Please note that both the earbuds can be used in mono mode. Use Smart / Manual Power On for switching on the desired earbud

Step 2: The selected earbud will automatically enter the connection mode indicated by green LED flashes

Step 3: Turn on Bluetooth on your phone/media device and search for ‘Airdopes 621’ to connect

Notes:

  • To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage
  • You cannot skip tracks or return to the previous tracks in Mono mode

LED Indicators / Functionalities

2 Seconds              Long touch either CTC for 2 sec to activate voice assistant3 Seconds              Long touch both CTCs for 3 seconds to manually power on5 Seconds              Long touch either CTC for 5 seconds to manually power off10 Seconds            Long press the CTC on both earbuds inside the case for up to 10 seconds for reset

Charging The Earbuds

Step 1: Please insert the earbuds back inside the charging case in correct orientation.Step 2: A solid green LED indicates that the earbuds are being charged. Once fully charged the LED turns offStep 3: Once the earbuds are fully charged, the charging case automatically switches off to save power.

Note:Before using the ear-buds for the first time, it is recommended to fully charge the ear-buds. Also, please keep the lid of the charging case closed while charging

Charge The Case

Step To charge the case, plug one end of the provided cable into the case and connect the other end to a computer/ wall adapter/ powerbank, etc.The case battery display shows the remaining battery capacity of the case as well as of both the earbuds

Basic Functions

  • Voice Assistant: Long touch the CTC on either earbud for 2 seconds to activate the voice assistant
  • Answer/Hang Up Call: Single tap the CTC on either earbud to answer an incoming call and once again to hang up an ongoing call
  • Reject Call: Long touch the CTC for up to 1.5 seconds to reject incoming calls
  • Play/Pause Music: Single tap on either earbud’s CTC to play or pause music
  • Next Track: When playing music, double tap the right CTC to skip to the next song
  • Previous Track: When playing music, double tap the left CTC to return to the previous song
  • Powerbank Function: In case of emergency, for instance when your phone runs out of battery, you may utilize the 2600mAh Case for charging your device for some time

Note:

  • It is advisable not to use the Carry cum Charge case as a power bank unless there’s some sort of emergency
  • Volume can only be controlled via the media device. The earbuds do not support this function

Voice Assistant

Step 1: Long touch the CTC on either earbud for 2 seconds to activate the smart voice assistant (Google/Siri Assistant)

Step 2: The respective voice assistant screen pops up and you may place your commands at ease

Tips: You may try the following commands,

  • What is the weather?
  • Play a song
  • Set a reminder

Smart Power Off

Step 1: After usage, remove both the earbuds from your earsStep 2: Place the earbuds back into the charging case in correct orientationStep 3: The earbuds will automatically switch off (and enter into charging mode)

Manual Power Off

Step 1: Long touch the CTC on either earbud for 5 secondsStep 2: Once the earbuds get turned off, place them back inside the case and close the lid

Factory Reset

Perform the Factory Reset in case you face any difficulty while operating your Airdopes 621

NOTE: Before performing reset, clear “Airdopes 621” from pairing device history by forgetting device

Step 1: Place both the earbuds back inside the charging case in correct orientation

Step 2: Long press the CTC on both earbuds inside the case for up to 10 seconds to do Factory reset, which is indicated by the flashing of green LED three times

Step 3: Shut the lid of the charging case and then re-open it again

Step 4: Once you take the earbuds out from the charging case, they automatically restart

Step 5: Congratulations! Your Airdopes 621 has been Reset

Troubleshooting

Specifications

Warning

  • Please follow the instructions to operate
  • Please don’t use the ear-buds in extreme temperatures
  • Please don’t use the product near water
  • Please keep the product away from heat sources, as the heat may damage it
  • Don’t jam the ports such as charger port, LED port, etc.
  • It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ service life

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

,