airlive ISFP-LR-10G-10KM 10G Multi Giga SFP+MiniGBIC Transceiver User Guide

Industrial Level 10G Multi Giga SFP+ MiniGBICTransceiver, Up to 10KM, Hot-pluggable, Auto-fill backISFP-LR-10G-10KM

10G SFP+ transceiver 1310nm Up to 10KM
Single Mode Dual Fiber  Industrial-level LC Duplex Connector
DDM Function ESD Protection
Hot Pluggable -40°C~+85°C

Overview

The AirLive ISFP-LR-10G-10KM is a low-power, high-performance, and cost-effective single-mode Industrial level SFP+ Fiber transceiver for serial optical data communication applications up to 10Gbps and 10KM in Industrial environments. The low jitter and high sensitivity module is intended for multi-mode dual fiber and operates at a nominal wavelength of 1310nm, the higher operating temperature of -40°C ~ +85°C makes the module ideally suited for Industrial and higher temperature areas, the module is hot-pluggable.The transceiver incorporates TX Disable control, TX-Fault, and RX_LOS monitor functions. It is a duplex LC connector transceiver designed to work on Multi-Gigabit Ethernet applications and to provide IEEE802.3ae compliant link and Class I Laser safety compliant link.The suitable applications such as High-speed storage area networks, computer cluster cross-connect, customized high-speed data pipes, and more.

Features

  • 10Gbps Fiber Mini GBIC SFP+ Transceiver
  • Single-mode SFP+ fiber
  • Duplex LC connector Interface
  • Wavelength 1310nm DFB Laser and PIN photo detector
  • 10Gbps high speed
  • Distance up to 10KM
  • Low Power consumption < 1.0W
  • Hot-pluggable capability
  • Very low EMI
  • Excellent ESD protection
  • Compatible with SFF8472
  • Operating Temperature：-40°C ~ +85°C

Application

  • Fiber Channel Infrastructure
  • STM-16 Optical Interface
  • ATM Switches and Routers
  • SDH/SONET Switch Infrastructure
Application Environment examples
  • Bank
  • AirPort
  • Hotel
  • Expressway
  • Petrochemical Industry
  • Metro
  • Factory

Transmitter Operating Characteristic Optical, Electrical

Transmitter
Parameter Symbol Min. Typical Max. Unit
Centre Wavelength λc 1290 1310 1330 nm
Sid-Mode Suppression Ratio SMSR 35

–

–

 dB
Average Output Power Po -5 – +0.5 dBm
Extinction Ratio Er 3.5 dB
Dispersion Penalty 3.2 dB
Relative Intensity Noise RIN12OMA -128 dB/Hz
Total jitter Tj 215 PS
Input Differential Impendence Zin 90 100 110 Ohm
Data Input Swing Differential Vin 180 700 mV
TX Disable – Disable 2.0 Vcc V
TX Disable – Enable 0 0.8 V
TX Fault – Assert 2.0 Vcc V
TX Fault — De-Assert 0 0.8 V

Receiver Operating Characteristic Optical, Electrical

Receiver
Parameter Symbol Min. Typical Max. Unit
Centre Wavelength λc 1310 nm
Receiver Sensitivity Rsen

–

–

 -13 dBm
Receiver Overload Rov -12 dBm
Return Loss -3 dB
LOS Assert LOSA -28 dBm
LOS De-Assert LOSD -14 dBm
LOS Hysteresis 0.5 4
Output differential impendence Zout

–

 100

–

 Ohm
Data Input Swing Differential Vout 300

–

 800 mV
Rx LOS – Assert

–

 2.0

–

 Vcc V
Rx LOS — De-Assert

–

 0

–

 0.8 V

Industrial level Fiber for Long Distance up to 10Km, 10Gbps, auto- fallback

Extend the network further with the AirLive network switches and fiber modules. Use the Industrial SFP+ modules in the SFP+ ports which alsosupports DDM and offers more information about the fiber connection and makes it easier to find any faults or bad connections.

Specification

Model AirLive ISFP-LR-10G-10KM
Hardware

  • Power Supply Voltage3.15V~3.45VTypical Power Supply Voltage: 3.3V
  • StandardCompliant with IEEE 802.3aeCompliant with Digital Diagnostic SFF-8472Compliant with IEC-60825DDM SupportESD Protection
  • Total Supply Current:300mA
  • Data Rate:103125 Mbps
  • Power DissipationMax 1.0 W
  • Transmitter (Electrical – Optical)Centre Wavelength:– Min.:1290nm– Typical: 1310nm– Max.: 1330nmAverage Output Power Min -5 ~ +0.5dBmExtinction Ratio: 3.5dBOperating Data Rate: 10GbpsTx Input Differential. Voltage:– Min. 180 Mv– Max. 700 mVTx Fault Output Voltage – Assert:– Min. 2.0V– Max. VccTx Fault Output Voltage – De-Assert:– Min. 0V– Max. 0.8V
  • Receiver -Optical, ElectricalCenter Wavelength:– Typical 1310nmReceive Sensitivity In Average Power:– Max. -13dBmLos Assert: -12dBLos De-Assert: -28dBmLos Hysteresis– Min. 0.5– Max. 4Overload: -12dBmData Input Swing Differential Voltage– Min. 180mV– Max. 700mV
 Environment

  • Operating Temperature:-40°C to +85°C
  • Storage Temperature:-40°C to +85°C
  • Working Humidity:0%~85%, non-condensing

Standard package of SFP

  • Package size:TBD mm(L*W*H)
  • Package Weight:N.W: TBD kgs; G.W:TBD KGS
  • Package content:1 x SFP Module

Standard carton package

  • Quantity:10 pcs / 1 Blister
  • Dimensions5.8×1.3×0.9 cm
  • WeightTBD kgs

Ordering Information

  • Model:ISFP-LR-10G-10KM
  • Name:10Gbps Fiber Mini GBIC ISFP+ Transceiver,1310nm, LC connector, 10KM, hot-pluggable

* Specification will be changed without prior notice

 www.airlive.comAirLive Technology Corporation4F., NO. 132, LN. 235, BAOQIAO RD.,XINDIAN DIST., NEW TAIPEI CITY 231407,TAIWAN

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,