ESP-350BKESP-350WT
USER MANUAL
- Charging pins
- Microphones
- Multi-function buttons
- LED status indicators
- Charging case battery capacity check button
- Charging status indicators for the case
- Micro USB charging port
- Earbuds charging ports
Instructions
Getting startedThe earphones are turned on automatically when you take them out from the charging case. A “Power On” message is heard, and the LED STATUS INDICATORS flash green. In addition, attaching the earphones to the charging case turns off the earphones automatically, and their charging starts. To power ON/OFF manually, press and hold the MULTI-FUNCTION buttons for 2-3 seconds to turn them on or off.
When turning off the earphones, a “Power OFF” message is heard, and the LED STATUS INDICATORS flash red.
The ESP-350 earphones use a master-slave system. The R earbud is the master and it needs to be taken out of the case first. If L is taken out first it will act as a separate BT mono-Earphone.Notes:20 seconds after the earphones are turned on, the left and right earphones will be automatically paired. Auto power ON/OFF does not work when the charging case is not charged. When this occurs, turn the power ON or OFF manually.
TWS
About the True Wireless Stereo (TWS)The ESP-350 earphones are True Wireless Stereo (TWS). Therefore the transmission is completely wireless and without any cable linking the left channel to the right.Note:You can use each earphone individually (mono), as well as in pairs (stereo).
Using the Earphones
Bluetooth pairingWhen you use the earphones for the first time, follow the procedure below to pair them:
- Turn on the earphones automatically by taking them out from the charging case, or you can also turn them on manually; then a “Pairing mode” message will sound, and LED STATUS INDICATOR on the left earphone flashes green slowly, while red and green indicators flash quickly on the right earphone. This means that the earphones are already searching for another Bluetooth device to pair.
- Turn on the Bluetooth function of your smartphone, search the Bluetooth devices list and select AIWA ESP-350.Enter the code “0000” if needed.
Using the Earphones
3. If the device is paired successfully, the LED STATUS INDICATORS will flash green slowly, and a voice prompt “connected” will notify that the device is connected.Having succesfully paired, the device will be automatically connected to the earphones the next time.Notes:The earphones are turned off if no device is paired for more than 3 minutes.If the earphone will not start pairing, turn on the right earphone from a power-off state by holding down the multi-function button and continue to press the button for 4 seconds.
Disconnecting the Bluetooth deviceTo disconnect the currently paired device, turn on the right earphone from the off position, holding down the MULTI-FUNCTION button for 4 seconds. When you do this you will hear “Bluetooth pairing”, the LED STATUS INDICATORS will flash green and red rapidly and the earphones will return to their pairing status.Clearing the paired device list of the earphonePlace the earbuds in the EARBUDS CHARGING PORT. Press and hold the MULTI-FUNCTION button for 6 seconds. The LED STATUS INDICATOR lights of each earbud will flash and turn orange deleting the list of stored devices.
Playing musicOnce your device and the earphone are connected, you can listen to the music through Bluetooth.
- Use your device to adjust the volume level.
- To play or pause the playback, press the MULTI-FUNCTION button once.
- To skip forward to the next track, press the MULTI-FUNCTION button twice quickly.
- To go back to the previous track, press the MULTI-FUNCTION button three times quickly.
Voice controlYou can use your smartphone’s voice control function with AIWA ESP-350.
- Turn on your smartphone voice control.
- Press the MULTI-FUNCTION button for 1.5 seconds.
Once your smartphone’s voice control started you can hear a prompt voice “Voice Style” message that indicates the start of the voice control.
Incoming callsYou can use the earphone as a speakerphone.
- To answer an incoming call, press the MULTI-FUNCTION button.
- To hang up a call, press the MULTI-FUNCTION button.
- To reject a call, press and hold the MULTI-FUNCTION button for 2 seconds.
Battery and Charge
The earphones and the charging case have built-in lithium-ion polymer batteries.Charging the earphones
- Place each earphone in the charging case in the right position and close the case.
- When charging the earphones using the charging case, the LED STATUS INDICATOR lights red.
- The LED STATUS INDICATOR will change to green for one minute once the battery is fully charged, then it will turn OFF.
Charging the charging case
- Insert a micro USB into the MICRO USB CHARGING PORT of the charging case.
- The CHARGING STATUS INDICATORS FOR THE CASE will bright during the charging.
- Once disconnected, press the BATTERY CAPACITY CHECK BUTTON To check the remaining battery charge.
Notes:Every of the 4 LEDs in the charging status indicator represents a 25% of the battery.Before charging make sure the voltage is compatible.Before the first use we recommend to fully charge the device.
Replacement of Ear Tips
By default, M size pieces are mounted. If they do not fit your ears, choose the best size from the provided ear pieces and replace them.The sizes of the ear tips are S, M (mounted by default), and L.How to take off the ear tipsHold the earphone with one hand and with the other hand turn and pull the ear tip.Note:If the ear tip cannot be detached, wrap it in a dry soft and then turn it and pull.
How to mount ear tipsPush the ear tip into the protrusion of the earphone and make sure it does not come off easily.Caution:If the ear tips fall off and remain in your ears contact a doctor immediately.
Specifications
Bluetooth version: V5.0Bluetooth protocol: A2DP, SPP, AVRCP, HFP, HSPWireless range: 10m (30 ft.)Earphone Driver Audio Frequency Range: 50Hz-20,000HzBattery capacity: 460mAh (charging case) 80mAh x2 (earbuds)Battery play time: 12 hours on full charge (3x charging cycles)Charging time: 1.5 hrs (charging case) 1.5 hrs (earbuds)Drive impedance: 16 ohm
Due to continual revision and improvement of our products, design and specifications are subject to change without further notice.
Warning
To reduce the risk of electric shock, do not open the device, there are no parts that can be changed by the consumer.Refer all servicing to qualified personnel.IMPORTANT!– To avoid possible hearing damage, do not listen at high audio volume for long periods of time.– Do not place naked flame sources, such as lighted candles on the apparatus.– Do not throw batteries into fire! Respect the environment when disposing of used batteries.
When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EC.
Warning
All electrical and electronic products including batteries should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
Aiwa MyPods ESP-350BK, ESP-350WT Earbuds Manual – Aiwa MyPods ESP-350BK, ESP-350WT Earbuds Manual –
[xyz-ips snippet=”download-snippet”]