Alcatel Temporis IP10 Corded SIP Phone User Guide

Temporis IP10

QUICK START GUIDE

Status indicator Redial Programmable key
Call Hold / Resume Handsfree mode Ringing: mute ringer In conversation: mute /unmute microphone
Idle mode / ringing: ringervolumen control In conversation: speaker/earpiece volumen control

Phone web interface

  1. To find out your phone’s IP address long-press # key; the IP address will be readout
  2. Open a web browser on your computer.Enter http://and the IP address in the address bar and validate.
  3. Default login and password are « admin/admin » for an administrator.
  4. The minimum required configuration is one sip account. Check the administrator guide for details.

Making a call

Direct dialing: Lift the handset and enter the number. To end the call hang up the handset. Handsfree: Enter the number and press, or vice versa. Press again to end the call.

Accepting a call

Lift the handset or press.

Redial

Lift the handset and press to redial lastdialed number.

Putting a call on hold

To put a call on hold press.  To resume the call press again.

Speed dial

Configure up to 10 speed dial memories on the web interface.To dial out, long press the corresponding digit key (0 to 9)

Installation

Package content:Handset, base, handset cord, Quick start guide

Wall mounting– Drill 2 holes on the wall, with 131.2 or 162.2mm vertical separation– Insert screws and anchors (not included)– Plug phone connections– Align phone mounting holes with screws and slide downDeclaration of conformity for the European Community ATLINKS declares that Temporis IP10 telephone complies with the basic health, safety, and environmental requirements in all relevant EU directives. You can download the declaration of conformity from the following address: www.alcatel-business.com.The CE logo shown on the products indicates that they are compliant with the basic requirements of all the applicable directives.

report this ad

Environment

This symbol means that your inoperative electronic appliance must be collected separately and not mixed with the household waste. The EuropeanUnion has implemented a specific collection and recycling system for which producers’ are responsible.This appliance has been designed and manufactured with high-quality materials and components that can be recycled and reused.Electrical and electronic appliances are liable to contain parts that are necessary in order for the system to work properly but which can become a health and environmental hazard if they are not handled or disposed of in the proper way. Consequently, please do not throw out your inoperative appliance with household waste. If you are the owner of the appliance, you must deposit it at the appropriate local collection point or leave it with the vendor when buying a new appliance.

(a) – If you are a professional user, please follow your supplier’s instructions.(b) – If the appliance is rented to you or left in your care, please contact your service provider.

Please help us protect the environment in which we live! Notice of copyright and trademarksCopyright © 2020 ATLINKS. All rights reserved. ATLINKS reserves the right to change the technical specifications of its products without prior notice, so as to make technical improvements or respect new regulations.Alcatel and Temporis are registered trademarks. Alcatel logo and Alcatel name are trademarks of Alcatel-Lucent and used under license by ATLINKS.ATLINKS147 avenue Paul Doumer92500 RUEIL-MALMAISON FranceRCS Nanterre 508 823 747

Model : Temporis IP10A/W No.: 10002309 Rev.1 (EN/DE/FR/ES)Printed in China

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by