ALI Speaker Wall Mount Holder
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call qualified technician.Check carefully to make sure there are no missing or detective parts, Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
Serious Or Fatal Crushing Injuries Can Occur From TipOver.To Help Prevent TipOver:Never Allow Children To Climb Stand Hand Or Play On Any Part Of Monitor OR Stand.Use TipOver Restart OR Anchor Stand to WallUse Of Tipover Restraints May Only Reduce, But Not Eliminate Risk Of Tip Over.Small Parts- Not For Children Under 3 Years. Adult Supervision Is Required.
Supplied Parts List
Instructions
Step 1
Option A: Wood Stud
Drill holes at the marked positions. Place the Bracket 
over the marked screw locations. Insert Screws 
into the mounting holes and tighten using a screwdriver.
Option B: Concrete/Brick Wall
Drill holes at the marked positions. Insert the Anchors 
into the mounting holes. Place the Bracket over the marked screw locations. Insert Screws into the mounting holes and tighten using a screwdriver.
Step 2
Guide the Dot 2nd Gen to the bracket. Tie the power cord with Velcro Strap 
if needed.
We support the technology that brings your home to life.We offer high quality products, professional customer service, and extensive technical support.
If you have any questions ,please contact us.
1-844-SATTLER (18447288537)
References
[xyz-ips snippet=”download-snippet”]