Alliance Dryers User Guide

User’s Guidefor Dryers

Original InstructionsKeep These Instructions for Future Reference.CAUTION: Read the instructions before using the machine.(If this machine changes ownership, this manual must accompany the machine.)

WARNING

	WARNING
FOR YOUR SAFETY, the information in this manualmust be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or death.W033

WARNING

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone in your building.
Clear the room, building or area of all occupants.
Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
If you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agency, or gas supplier.

W052

Product Registration

New owners of Alliance Laundry Systems equipment are encouraged to register their appliance to insure proper limited warranty coverage.Register online at https://speedqueen.com/support/register-your-products/ or contact your dealer to register your appliance. All information will be kept confidential and will not be distributed to other parties.

Safety Information

Explanation of Safety Messages

Precautionary statements (“DANGER,” “WARNING,” and “CAUTION”), followed by specific instructions, are found in this manual and on machine decals. These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining the machine.

	WARNING
Indicates an imminently hazardous situation that, if not avoided, will cause severe personal injury or death.

	WARNING
Indicates a hazardous situation that, if not avoided, could cause severe personal injury or death.

	CAUTION
Indicates a hazardous situation that, if not avoided, may cause minor or moderate personal injury or property damage.

Additional precautionary statements (“IMPORTANT” and “NOTE”) are followed by specific instructions.IMPORTANT: The word “IMPORTANT” is used to inform the reader of specific procedures where minor machine damage will occur if the procedure is not followed.NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is important but not hazard-related.

Important Safety Instructions

Save These Instructions

WARNING

To reduce the risk of fire, electric shock, serious injury or death to persons when using your dryer, follow these basic precautions:

W130

Read all instructions before using the dryer.
Refer to the GROUNDING INSTRUCTIONS in the INSTALLATION manual for the proper grounding of the dryer.
Do not dry articles that have been previously cleaned in, soaked in, washed in, or spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances as they give off vapors that could ignite or explode.Highly flammable substances commonly used in domestic environments including acetone denatured alcohol, petrol/ gasoline, kerosene, spot removers (some brands), turpentine, waxes,, and wax removers. This appliance shall not be used to dry off solvents or dry-cleaning fluids.
Do not allow children to play on or in the unit. This appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.
Before the dryer is removed from service or discarded, remove the door to the drying compartment.
Do not reach into the dryer if the cylinder is revolving.
Do not install or store the dryer where it will be exposed to water and/or weather.
Do not tamper with the controls.
Do not repair or replace any part of the dryer or attempt any servicing unless specifically recommended in the user maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.
Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener product.
To reduce the risk of fire, DO NOT DRY plastics or articles containing foam rubber (also known as latex foam) or similarly textured rubberlike materials. Foam rubber materials can when heated, produce fire by spontaneous combustion.
Always clean the filter after every load. A layer of lint in the filter reduces drying efficiency and prolongs drying time.
Keep the area around the exhaust opening and adjacent surrounding area free from the accumulation of lint, dust, and dirt.
The interior of the dryer and the exhaust duct should be cleaned periodically by qualified service personnel.

Safety Information

This gas appliance contains or produces a chemical or chemicals which can cause death or serious illness and which are known to the State of California to cause cancer, birth defects, or other reproductive harm. To reduce the risk from substances in the fuel or from fuel combustion, make sure this appliance is installed, operated, and maintained according to the manufacturer’s instructions.
The dryer will not operate with the loading door open. DO NOT bypass the door safety switch by permitting the dryer to operate with the door open. The dryer will stop tumbling when the door is opened. Do not use the dryer if it does not stop tumbling when the door is opened. Do not use the dryer if it does not stop tumbling when the door is opened or starts tumbling without pressing or turning the START mechanism.Remove the dryer from use and call the service person.
Do not put articles soiled with vegetable or cooking oil in the dryer, as these oils may not be removed during washing. Due to the remaining oil, the fabric may catch on fire by itself.
To reduce the risk of fire, DO NOT put clothes that have traces of any flammable substances such as machine oil, flammable chemicals, thinner, etc., or anything containing wax or chemicals such as in mops and cleaning cloths, or anything dry-cleaned at home with dry-cleaning solvent in the dryer.
Use the dryer only for its intended purpose, drying clothes.
Always disconnect the electrical power to the dryer before attempting service. Disconnect the power cord by grasping the plug, not the cord.
If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
Install this dryer according to the INSTALLATION INSTRUCTIONS. All connections for electrical power, earthing andgas supply must comply with local codes and be made by licensed personnel when required. Do not do it yourself unless you know-how!
Remove laundry immediately after the dryer stops.
Always read and follow the manufacturer’s instructions on packages of laundry and cleaning aids. Heed all warnings or precautions. To reduce the risk of poisoning or chemical burns, keep them out of reach of children at all times (preferably in a locked cabinet).
Do not tumble fiberglass curtains and draperies unless the label says it can be done. If they are dried, wipe out the cylinder with a damp cloth to remove particles of fiberglass.
ALWAYS follow the fabric care instructions supplied by the garment manufacturer.
Never operate the dryer with any guards and/or panels removed.
DO NOT operate the dryer with missing or broken parts.
DO NOT bypass any safety devices.
Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions that can produce bodily injury and/or property damage.

NOTE: The WARNING and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution, and care must be exercised when installing, maintaining, or operating the dryer.Always contact your dealer, distributor, service agent or manufacturer about any problems or conditions you do not understand.

Before Drying

Energy Saving Tips

Make sure the lint filter is always clean.
Do not overload the dryer.
Do not overdry items.
Remove items to be ironed while still damp.
Large loads of similar fabrics dry the most efficiently. However, dry permanent press in smaller loads to prevent wrinkling.
Use the correct cycle for the type of fabric being dried.
Locate your dryer so the exhaust duct is as short and straight as possible.
Do not open the door during the drying cycle.
Plan to do your laundry on low humidity days; your clothes will dry faster.
Dry multiple loads of clothes one right after another so the dryer interior does not have to be reheated for each load.

Help and Hints

WARNING

To reduce the risk of fire, explosion, serious injury, or death, clothes that have traces of any flammable substances such as cooking oil, machine oil, flammable chemicals,thinner, etc. must not be put into the dryer.

W131

The directions for installation and proper exhausting are given in the Installation Instructions which are included with the dryer.
Static electricity may cause garments of synthetic fibers (as in lingerie) to cling together, especially if they are overdried.The use of a liquid fabric softener in the rinse water of the washer, or a fabric softener sheet in the dryer, will soften clothes and reduce static electricity.
Do not wash or dry clothes that shed lint in the same load with the permanent press or knit garments.
Remove permanent press loads immediately after the dryer stops.
Follow the care labels on FLAME RETARDANT, SCOTCHGUARD™, etc., garments for proper washing and drying.
If loads should be damp for ironing, use the Damp Dryness setting, in an Automatic cycle.

Sort

If you have correctly sorted the items for washing, they should be properly sorted for drying too.

Sort by color.
Separate lint shedding fabrics and lint receiving fabrics.Towels, flannels, chenille, cotton, rugs, etc., shed lint. Corduroys, knits (including socks), permanent press, and synthetics attract lint.
Separate no heat, low heat, and high heat items.In any kind of drying, lightweight fabrics will dry faster than heavyweight fabrics. If mixed loads are dried together (such as sheets and towels), remove the lighter-weight fabrics when they are dry to prevent overdrying and wrinkling. The best method is to dry clothes that require the same time, temperature, or dryness level in the same load.

Load

WARNING

Do not wash or dry items soiled with vegetable or cooking oils. Some oils may remain after washing and may cause the fabric to catch on fire by itself.

W527

Do not overload your dryer. Bulk, not weight, determines the load size. If the dryer is overloaded, it could cause discoloration or permanent heat damage to the load.
There should be space in the dryer for the clothes to tumble freely and help to reduce wrinkles.
Large and small pieces together make uploads that will tumble well. Permanent press loads should be smaller to provide room for tumbling. Proper tumbling allows for fewer wrinkles.
A load can be too small. Just a few small pieces will not tumble properly. They will take longer to dry and they may be wrinkled. For small loads, add a couple of large towels or nonlint shedding items to aid in tumbling.
The following illustrations show the ideal load sizes for fabrics. The average load will fill the cylinder one third to half full when wet.

Cylinder with wet linens and cotton

Cylinder with wet permanent press items

Operating Your Dryer

WARNING

To reduce the risk of fire, electric shock, serious injury or death to persons, read the Safety Information section before operating the dryer.

W520

Available Drying Settings

Dryness selections are based on the size of the load, the type of fabric, and the desired moisture level of the fabric.MAX DRY and MORE DRY will dry very small loads and some heavy items, such as blue jeans, but will overdry lightweight items, such as sheets and shirts. Overdrying can cause wrinkling, shrinking, excessive lint conditions, and will use more energy than necessary.LESS DRY, which uses the least energy, will dry large loads and lightweight items, such as sheets and shirts, but might leave other items, such as denim and heavy bath towels, damper.To increase energy savings and to make sure loads are dried without overdrying, set your loads on LESS DRY. If items are damp at the end of a cycle, the timer knob needs to be set closer to the MORE DRY setting the next time these loads are dried. If items are overdried at the end of a cycle, the timer knob should be set closer to COOL DOWN when these loads are dried again. Remember the settings that work best to get ideal drying results. The COOLDOWN period at the end of each cycle provides items a chance to tumble with no heat and cool down to room temperature. This prevents wrinkles from setting if items cannot care for immediately.The EXTENDED TUMBLE setting continues to tumble items at no heat after the cycle has been completed. This prevents wrinkling when garments cannot be removed from the dryer immediately. By pressing the EXTENDED TUMBLE button to ON, the AUTOMATIC REGULAR/DELICATE and AUTOMATIC PERM PRESS/ KNITS cycles will tumble an additional 40 minutes.NOTE: The timer knob will not advance as quickly in the AUTOMATIC cycles as it does in the TIMED DRY cycle. The time it takes for the timer knob to advance depends on the type and size of the load being dried.The ENERGY SAVER settings, marked with an asterisk(*), show which settings will use the least energy and will leave items damp for easier ironing.

Cycle Selection

The following cycle descriptions will help determine which cycle to choose depending on the type of laundry being dried.NOTE: Use Timed Dry Cycles for No Heat tumble. Using Automatic cycles with No Heat will result in very short cycle times. Automatic cycles are designed to dry loads using heat to the dryness level selected.

Automatic Perm Press/Knits Cycle

Use for permanent press items and synthetics. The type of heat is determined by selecting the proper Fabric Selector option. There are three settings in the AUTOMATIC PERM PRESS/ KNITS cycle: drier, LESS DRY, and COOL DOWN.

Automatic Regular/Delicate Cycle

Use for sturdy items like play or work clothes and also for delicate items. The type of heat is determined by choosing the proper FabricSelector option. There are four settings in the AUTOMATIC REGULAR/DELICATE cycle – MAX DRY, drier, LESS DRY, and COOL DOWN.

Automatic Wrinkle Out Cycle

Use this for items that are slightly wrinkled after sitting in a dryer or laundry basket overnight. The cycle has a short heat setting followed by a 15 minute COOL DOWN.

Timed Dry Cycle

This cycle will operate the dryer for up to 75 minutes. Cotton and heavyweight items dry best between 50 and 75 minutes, and lightweight items dry best between 20 and 40 minutes. Select the heat type with the Fabric Selector.SanitizeTo Sanitize your laundry load and kill 99.9% of common household bacteria*, set the Fabric Selector to Regular, set the Cycle Selection to Timed Max-Dry as indicated on the controls, and allow the dryer to complete the cycle uninterrupted.NOTE: The Sanitize setting uses high heat. Check the fabric label for proper care instructions.

*Bacteria tested by an independent lab were Staphylococcus aureus, Pseudomonas aeruginosa, Klebsiella pneumonia. Individual resultsmay vary.

Fabric Selector

The type of heat is determined by selecting the proper Fabric Selector option.Use NO HEAT on items that shrink easily or to “fluff” items.Use DELICATE to dry delicate items.Use PERM PRESS for permanent press items and synthetics.Use REGULAR for sturdy items like play or work clothes.

Signal

The volume of the signal tone may be set on OFF, LOUD or between the two selections. If a volume level is selected, the signal will letyou know when the cycle is done.If the Extended Tumble option is selected the signal will sound each time the dryer tumbles.

To Dry Clothes

This appliance shall not be used to dry off solvents or dry cleaning fluids. Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.IMPORTANT: Refer to the INSTALLATION INSTRUCTIONS before using dryer.IMPORTANT: Before using the dryer for the first time, use an all-purpose cleaner or a detergent and water solution and a damp cloth to remove shipping dust from the inside of the dryer drum.

NOTE: This appliance is designed for repeated normal operation according to operating instructions.

Sort items into separate loads.NOTE: Remove all sharp objects from laundry to avoid tears and rips to items during normal machine operation.IMPORTANT: Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil.Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking, or storing oil-affected items can prevent heat from escaping and so create a fire hazard.

Clean lint filter (if using lint filter guard, remove first).

1. Lint Filter Guard (optional)2. Lint Filter

WARNING

To reduce the risk of fire and the risk of lint collecting in the exhaust duct, do not operate the dryer without a lint filter in place.

W771

NOTE: The Lint Filter Guard is an optional accessory to help prevent items from falling in the lint filter.

Load dryer half full with laundry (18 pounds [8.2 kg] maximum dry clothes load).Add fabric softener sheet, if desired.NOTE: To avoid damage to the dryer, do not use more than one fabric softener sheet per load.Operating Your Dryer
Close loading door. The dryer will not operate with the door open.
Select Fabric Selector based on load type. Follow garment manufacturer’s care labels for recommended temperature settings.
Select the optional EXTENDED TUMBLE setting to continue tumbling items at no heat.
Select the desired Cycle setting under Cycle Selection using the timer knob. These settings control the drying time.The ENERGY SAVER settings, marked with an asterisk (*), show which dryer settings will use the least energy and will leave items damp for easier ironing.
Push the start button to start the dryer.NOTE: To stop the dryer at any time, open the door or turn the timer knob to an off position. To restart dryer, close door, reset timer knob if necessary, and push start button.Optional Drying RackA drying rack, Part No. D512082 is available at extra cost through your Factory Authorized Service Center.The drying rack can be used in timed dry cycles only for notumble drying of articles such as tennis shoes, sweaters, stuffed toys or other delicate items.

Maintenance

Lubrication

All moving parts are sealed in a permanent supply of lubricant or are equipped with oilless bearings. Additional lubrication will not be necessary.

Care of Your Dryer

WARNING

To reduce the risk of an electric shock, serious injury or death, disconnect the electrical service to the dryer before cleaning the interior.

W132

Dryer Interior

Wipe the surfaces using a soft cloth and household cleaner or a non-abrasive paste of powdered laundry detergent and hot water, followed by a short heat cycle with a load of rags.To remove crayon or ballpoint ink off the dryer drum, put the heat on high and use old rags in the dryer to absorb the crayon or ink. If unsuccessful, contact the appliance dealer. DO NOT use any chemicals in the dryer.IMPORTANT: The use of chlorine bleach for removing any discolorations should be avoided because bleach could damage the finish.

Cabinet

Wipe the dryer cabinet as needed. If detergent, bleach or other washing products have been spilled on the dryer, wipe immediately. Some products will cause permanent damage if spilled on the cabinet.

Control Panel

Use only a damp or sudsy cloth for cleaning the control panel.Some spray pretreat products may harm the finish on the control panel. DO NOT use products that contain alcohol on the control panel.

Exhaust System

WARNING

To reduce the risk of electric shock, disconnect the electrical service to the dryer before cleaning.

W043

WARNING

Any disassembly requiring the use of tools must be performed by a suitably qualified service person.

W299

The exhaust duct should be inspected after one year of use and cleaned if necessary by a qualified service person to remove any lint build-up. Inspect and clean exhaust duct every one to two years as required thereafter.Every two years a qualified service person should remove all front panels and vacuum the inside of the dryerNOTE: This recommended maintenance is not covered under the terms of the warranty.The weather hood should be checked frequently to make sure the dampers move freely, dampers are not pushed in and that nothing has been set against them.Keep dryer area clear and free from combustible materials, gasoline, and other flammable vapors and liquids.Do not obstruct the flow of combustion and ventilation air.NOTE: Verify proper operation after servicing.

Lint Filter

The lint filter is located at the front of the dryer in the lower part of the door opening.CLEAN THE LINT FILTER BEFORE DRYING EACH LOAD. (If using an optional lint filter guard, remove first).Annually remove the lint filter and screw to vacuum the duct under it.

Troubleshooting

Try these troubleshooting tips before making a service call.They may save you time and money.

Dryer Symptom	Possible Cause/Solution
The dryer won’t start	• Make sure the power cord is plugged all the way into the electrical outlet.• Make sure the loading door is closed.• Push the start button to start the dryer.• Make sure the laundry room fuse(s) isn’t blown or loose, or circuit breakers aren’t open.• The dryer itself does not have an electrical fuse. An electric dryer has an electrical circuit with two fuses.• Check if the motor overload protector has cycled. Wait 10 minutes and try again.
The dryer won’t heat	• Electric dryers only – Some homes may have two fuses or circuit breakers for an electric dryer; both fuses or circuit breakers should be checked. Make sure the laundry room fuse(s) isn’t blown or loose, or that the circuit breakers aren’t open.• Gas dryer only – Make sure equipment and main gas line valve is turned on.• Check the exhaust duct to the outside to see if it is kinked, blocked, or needs cleaning.• Check weather hood to make sure flapper moves freely, has not been pushed in, or has not been blocked.
Dryer doesn’t dry clothes satisfactorily	• Check the exhaust duct to the outside to see if it is kinked, blocked, or needs cleaning.• Check weather hood to make sure flapper moves freely, has not been pushed in, or has not been blocked.• Auto-Sensing cycle – Adjust Dryness selection.• Timed Dry cycle – Allow more or less time.• Clean the lint filter.• Make sure the load isn’t too small. Small loads may not tumble properly or dry evenly.• The Auto-Sensing cycles are not suggested to be used for small loads such as two small towels. For those loads, use the Time Dry cycle.• Check load being dried. Heavy items dried with lightweight items will not dry as quickly as the rest of the load.• Refer to the Sort section for proper sorting information.
Dryer is noisy	• Check the exhaust duct to the outside to see if it is kinked, blocked, or needs cleaning.• Check weather hood to make sure flapper moves freely, has not been pushed in, or has not been blocked.• Auto-Sensing cycle – Adjust Dryness selection.• Timed Dry cycle – Allow more or less time.• Clean the lint filter.• Make sure the load isn’t too small. Small loads may not tumble properly or dry evenly.• The Auto-Sensing cycles are not suggested to be used for small loads such as two small towels. For those loads, use the Time Dry cycle.• Check load being dried. Heavy items dried with lightweight items will not dry as quickly as the rest of the load.• Refer to the Sort section for proper sorting information.
Clothes are too wrinkled	• Check heat setting. Overdrying can cause wrinkling.• Check load size. Large loads may not tumble properly and may cause wrinkling.
Clothes have odor	• Check the room for odors before drying clothes. Any odor (fried foods, paint, varnish, cleaners, burning wood, etc.) will transfer to clothing as the dryer draws air from the room.• Ventilate the room before drying clothes.
Cycle advances too slowly	• When in an Auto-Sensing cycle, the time it takes depends on the type and size of the load being dried. When clothing has more moisture, the cycle takes longer than when the clothes are more dry.

Warranty Repairs

If something should occur with your washer or dryer that requires service please use the service locator at www.speedqueen.com.We would like to point out items that would not be considered a product failure and are not covered under warranty. If a service technician is called for the items listed below you will be responsible for payment of the service call.

Plugged or restricted venting
Kinked enting
Cleaning lint from within the dryer
Home electrical issues
Home gas issues
Foreign objects found inside the dryer

Contact Information

If service is required, contact the nearest Factory Authorized Service Center. To find the nearest service center, visit us online atwww.speedqueen.com.If you are unable to locate an authorized service center or are unsatisfied with the service performed on your unit, contact:Shepard StreetP.O. Box 990Ripon, Wisconsin 54971-0990www.speedqueen.com – select “Find Service” and enteryour zip code to find a local service companyPhone: 800-552-5475

Date Purchased

Model Number

Serial Number

1. Serial Plate

When contacting us about your washer, PLEASE GIVE THE MODEL AND SERIAL NUMBERS. The model and serial numbers are located on the serial plate. The serial plate will be in the location shown. Please include a copy of your bill of sale and any service receipts you have.If replacement parts are required, contact the source from where you purchased your washer or visit us online atwww.speedqueen.com.

WARNING

To reduce the risk of serious injury or death, DO NOT repair or replace any part of the unit or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that you understand and havethe skills to carry out.

W329

Part No. D518609EN

References

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-23

Alliance

admin

Tags:

Alliance, Dryers