ALM 3U 84HP Eurorack Powered Case Installation Guide
Parts List
Assembly Instruction
Assembly Complete!
Final Setup
- Locate a 12-15V center positive DC power supply with at least 2A of current.
- Prior to adding any modules test the empty case and ensure both the -12V and +12V LEDs light. If a +5V LED is present it will not light.
- If the LEDs do not light check that the connections match this manual’sdiagrams exactly. Additionally, make sure your supply has the correct polarity.
- If the board powers properly you are ready to populate the case with yourfavourite Eurorack modules. The power board can supply a maximum of 1A to all of the modules combined.
- Use standard M3 screws to secure modules.
- Enjoy your new compact ALM case!
Visit the ALM TV YouTube channel to view our video assembly guide.For additional support please visit busycircuits.com/support
References
[xyz-ips snippet=”download-snippet”]