ALTEC IMW1000 Hydra Mini Everything proof Wireless Speaker User Guide

JUST LISTEN.

HydraMini Everythingproof™Wireless SpeakerIMW1000QUICK START GUIDE

In the Box

A Closer Look

Charging

Powering On/ Bluetooth Pairing

Speaker Controls

PRESS	PRESS & HOLD (2 sec)
+	Volume Up		ON/OFF
–	Volume Down	+	Next Track
	Play/Pause	–	Previous Track
	Answer & End Call		Reject Incoming Call

True Wireless Pairing

Turn on the first speaker and connect It with a Bluetooth-compatible device.

Turn on the second speaker and press the button.

Press and hold the button for 2-3 seconds on the first speaker.The LED indicator on both speakers turns solid green once connected to each other.

With the speakers connected, True Wireless uses the speaker as a left and right channel to create a cinematic experience.* Disconnect TWS function: power off the unit *

Just Ask / Reset

Press To activate JUST ASK (Siri or Google Assistant)

Reset- Press & Hold Disconnect Bluetooth: Press and hold for five seconds and the speaker will beepReset All connections: Press and hold for ten seconds and the speaker will power off

Overall battery performance varies depending upon use setting and environmental conditions. For further information, please visitwww.alteclansing.com

Light Change Mode

To toggle between the different light modes:

1. Multicolor slow transition
2. Single color pulse to music
3. Multicolor pulse to music
4. Single color slow fade
5. Single color
6. Multicolor cycle changed
7. Multicolor fast changed with background-color
8.  Multicolor slow fade
9. Four color slow fade
10.  Four color rotation with a pulse to music
11. Four color rotation
12. Off

Press & Hold the button for 1-2 sec to change the Strobe light modes.* off → Pulse to music → Blink → off *

FOLLOW US ON#myaltecansing

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.

Sakar International Inc.195 Carter DriveEdison, New Jersey 08817, USA855-292-4087www.alteclansing.com

References

• 
  Altec Lansing