Aluratek ABCTVKIT Bluetooth Wireless TV Streaming Kit w/ Bluetooth 5
Package Contents
Your order has been carefully packaged and inspected. The following accessories should be included in your package. Please inspect the contents of the package to ensure that you have received all items and that nothing has been damaged. If you discover a problem, please contact us immediately for assistance.
Receiver / Transmitter Product Highlights
Bluetooth Headphones – Product Highlights
Charging The Headphones
The battery is not fully charged and it is highly recommended that you charge the headset before you begin using it.Note: Using ABCTVKIT “out of the box” will not harm the device. You will experience reduced battery life as the unit will not be fully charged.
Charging the Headphones
Connect the larger USB end of the provided cable to your computer / power adapter(not included). Connect the smaller USB end to the USB port on the bottom right side of the heaphones. Please charge the battery for a minimum of 2 hours. The red LED will be on while charging. The light will turn blue when it is fully charged.
Using the Transmitter and Headphones with a TV
There are three ways to connect the Transmitter:
- Connect using the AUX cableConnect the Transmitter to the AUX OUT / headset (3.5mm) port on the back of your TV.
- Connect using the RCA-Y cableWhen using the included RCA cable to connect to a TV or tuner / receiver, please make sure you connect to the RCA OUT. Some TV’s may not have an RCA OUT. Connecting to the RCA IN will not work.
- Connect using the Optical (SPDIF) cableWhen using the included Optical cable to connect to a TV or tuner / receiver, please make sure you connect to the SPDIF OUT on the TV / tuner and connect the optical cable to the SPDIF IN port on the transmitter.The Transmitter and Headphones are pre-paired and ready for use out of the box. Simply power on both devices and enjoy!Note: ABCTVKIT will try to reconnect when it is powered ON / OFF again or when it is out of range.
The Transmitter and Headphones are pre-paired and ready for use out of the box. Simply power on both devices and enjoy!Note: ABCTVKIT will try to reconnect when it is powered ON / OFF again or when it is out of range.Bluetooth Headphones – Device Operation (using with other devices)
Pairing with devices such as an iPhone, smartphone, and tablet:The pairing procedure will vary depending on the actual device. Please refer to the user guide of your device for detail instruction. The pairing procedures are as follows:
- Make sure the headphones are powered off.
- Power on the headphones and it will enter pairing mode automatically.(Red and Blue LED will flash rapidly)
- Activate your device’s Bluetooth function and set your device to search for Bluetooth devices. Select ABCDMKITH when it is found.
- If prompted by your device to connect, please select “Yes”.
- After connecting successfully, the blue LED will flash every 10 seconds.
Note: Please make sure the audio output is set to Bluetooth for audio streaming from the device.
Technical Support
If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device.E-mail: [email protected]Web: www.aluratek.com/helpdeskLocal (Irvine, CA): 714-586-8730Toll Free: 1-866-580-1978
Radio and TV Interference Statement
WARNING!!! This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by whatever measures may be required to correct the interference.
Warranty
Aluratek warrants this product against defect in material or workmanship for 1 YEARfrom the date of purchase.This warranty becomes invalid if the factory-supplied serial number or “warranty void” sticker has been removed or altered on the product.This warranty does not cover:
- Cosmetic damage or damage due to acts of God
- Accident, misuse, abuse, negligence or modification of any part of the product.
- Damage due to improper operation or maintenance, connection to improper equipment, or attempted repair by anyone other than Aluratek.
- Products sold AS IS or WITH FAULTS.
IN NO EVENT SHALL ALURATEK’S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, IT’S ACCOMPANYING SOFTWARE, OR IT’S DOCUMENTATION.Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it’s products, contents or use of this documentation and all accompanying software, and specifically disclaims it’s quality, performance, merchantability, or fitness for any particular purpose. Aluratek reserves the right to revise or update it’s product, software or documentation without obligation to notify any individual or entity.
report this ad
References
[xyz-ips snippet=”download-snippet”]