amazonbasics B0872QFB34 Dual 10W Wireless Charging Pad User Manual

amazon.com/AmazonBasics10 W Qi Certified Dual Wireless Charging PadB0872QFB34, BO876RSX14,BO876RMWNQ

Important Safety Instructions

Read these instructions carefully and retain them for future use. If this appliance is passed to a third party, then these instructions must be included.

  • The charging pad is only to be used with the power supply unit provided.
  • Keep the appliance out of reach of children.
  • Remove the mobile device when it is fully charged and unplug the appliance.
  • The appliance shall not be exposed to dripping or splashing water.
  • The appliance is intended for private indoor use only.

SAVE THESE INSTRUCTIONS

Operation

  • Remove magnetic or metal accessories and the case with ts thickness over 5 mm from the device to be charged to avoid interfering.
  • Place the device to be charged on the center of the charging surfaces.

Indicator Light

Indicator status Mode
Blinks blue once Power connected
Solid blue Standby
Blue pulsing Charging/Fully charged
Green flashing Foreign object detected/Over-temperatureprotection/ Over-voltageprotection/ Low-voltage protection

Specifications

Model number B0872QFB34,BO876RSX14,BO876RMWNQ
Rated voltage 12V === 2.5A
Rated wattage Max. 20 W (2x 10 W)
Dimensions W x Dx H) 7.7X3.6×0.4″(195.6 x 90.3 x 11.3 mm)
Net weight (excl. cable) 0.32 Ibs (145 g)
Frequency 111-205 kHz
Transmission power 55.52 dBuA/m (@3m)

Power supply

Manufacturer’s name or trademark, commercial registration number, and address Amazon EU S.arl., 38 avenue John F. Kennedy, L-1855  Luxembourg Commercial registration number: 00134248
Model number 2ABLO30F
Input voltage 100-240 V~
Input AC frequency 50/60 Hz
Output voltage 12V
Output current 25A
Output power 30 W
Average activeefficiency 87.88%
Efficiency at lowload (10 %) 83.26%
No-load powerconsumption 0.042 W

FCC Compliance Statement (for power adapter)

  1. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
  2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful nterference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation. I this equipment does cause harmful interference to radio or  television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or  more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an expert and radio/TV technician for help.

RF Exposure StatementThis equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part of your body.

FCC Compliance Statement (for wireless charger)This device complies with Part 18 of the FCC Rules.NOTE: This equipment has been tested and found to comply with the limits for consumer devices, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or  more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an expert radio/TV technician for help.

Canada IC Notice

  • This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to thefollowing two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device.
  • This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.

Simplified EU Declaration of Conformity

Disposal

The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimize the impact of electrical and Mmmm electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed of separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centers in order to conserve natural resources. Each country should have its collection centers for electrical and electronic equipment recycling. For information about your recycling drop-off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service.  Feedback and Help Love it? Hate it? Let us know with a customer review. AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.

Feedback and HelpLove it? Hate it? Let us know with a customer review. AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.

US: amazon.com/review/review-your-purchases#UK: amazon.co.uk/review/review-your-purchases#

US: amazon.com/gp/help/customer/contact-usUK: amazon.co.uk/gp/help/customer/contact-usor

Contact Customer Service at+1 877-485-0385

V01-07/29/20MADE IN VIETNAM

[xyz-ips snippet=”download-snippet”]