Aminy U-Air6 earbuds
USER MANUAL
PACKING LIST
DIAGRAM
FINDING THE RIGHT FIT
Because fit is crucial for the enjoyment and comfort of an earphone, the Aminy U-Air6 was designed in close consultation with audiologists. Designed not just to fit into the ear canal with different sized silicon tips, but also to comfortably and securely fit the Concha.
The Amity U-Air6 does this not only with interchangeable ear tips but also interchangeable silicon wings. The earbuds come installed with medium sizes of both. If you find the fit is not perfect, you may wish to remove the wing accessory and experiment with the other included ear tips, followed by trying different sizes of wings.
The correct size wing should fill the ear’s Concha and be held securely in place by the Antihelix and Antitragus
POWER ONC
- The earphones will automatically turn on and start pairing when you open the charging case. If they have been previously paired, they will reconnect with the most recently connected device.
- If the earphones have gone to sleep outside of the case (after ten minutes without use) they can be turned on by simultaneously pressing and holding the MFB of both earbuds for 2 seconds.
POWER OFF
- Option #1: Put the earphones back in the charging case and close the case to turn them off.
- Option #2: If the earphones are not in the charging case, just press and hold the MFB of both earbuds for 5 seconds to power them off. (Music must be stopped and calls ended to power off.)
PAIRING
- When the charging case is opened, they will automatically enter pairing mode. The LED light will flash white and red.
- From your phone’s Bluetooth menu, select “Aminy U-Air6”
For convenience, the Aminy U-Air6 earphones are designed to automatically reconnect to the most recently paired device. To pair to a new device, disconnect the Bluetooth from the last device. The earbuds will automatically enter pairing mode.
MUSIC
Volume Up / Down
- Volume +: press and hold the MFB button of the Right earbud to turn up the volume
- Volume -: press and hold the MFB button of the Left earbud to turn down the volume
Next / Previous Track
- Next Track: double touch the MFB of the Right earbud.
- Previous Track: double touch the MFB of the Left earbud.
Play / Pause
- Touch the MFB of either earbud once.
INCOMING CALL
Answer / Hang Up
- Double touch the MFB of either earbud.
2. Reject
- Press and hold the MFB of either earbud for 1 second.
DIGITAL ASSISTANT
- Triple-touch the MFB of either earbud to initiate Google Assistant or Siri
RESET
While in the charging case, simultaneously press and hold the MFB of both earbuds for 5 seconds. When the LED light flashes red, the device has reset and cleared the previous device connections.
CHARGING
- How to know the remaining battery of the charging case?
- Do not put the earbuds in the charging case when the earbuds are wet.
Miscellaneous Notes/Troubleshooting
- When you return the earbuds to the charging case the MFB LED should illuminate (red if charging, white if fully charged) and they should disconnect from the phone automatically. if they do not, then either they are not well seated in the case or the case is fully discharged.
FCC STATEMENT
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.Operations is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Aminy U-Air6TRUE WIRELESS EARBUDSAminy CorporationCustomer service EmailUSA: [email protected]Japan: [email protected]
[xyz-ips snippet=”download-snippet”]