SUPPORT
For FAQs, detailed user manual and more information, please visit www.soundcore.com/support
APPDownload the Soundcore App to customize the user interface (e.g. adjust volume, control playback, activate voice assistant), trace HearID, adjustEQ, switch ANC modes, update firmware, and explore more.- FIRMWARE UPGRADEEnsure the earbuds are placed in the charging case and the case remains open until the firmware upgrade is completed.
- AMBIENT SOUNDSwitch ANC/Transparency/Normal modes in the Soundcore App.*ANC (Active Noise Cancellation): Reduce unwanted background noise.*Transparency: Stay aware of surroundings while listening to music.
- WEARINGChoose the Liquid Silicone EarTips that fit your ears best.
- CHARGINGFully dry off the earbuds and the USB-C charging port before charging.Use a certified USB-C charging cable to prevent any damage. For wireless charging, position the charging case at the center of your wireless charger.
- POWERING ON/OFFOpen the charging case, the earbuds will automatically power on. To power off, place the earbuds in the charging case and close it.
- PAIRINGOpen the charging case, the earbuds will automatically enter the Bluetooth pairing mode. Select “Soundcore Liberty Air 2 Pro” on your device’s Bluetooth list to connect.
- CONTROLSx2: Tap twice 2s: Press and hold for 2 seconds Auto-pause music playback when removing the earbuds, wear them again to resume.
- RE-PAIRINGPairing with another device: Place the earbuds in the charging case and leave the case open. Press and hold the button on the case for 3 seconds until the earbud LED indicators flash white to enter pairing mode.
- RESET
- Reset if the earbuds cannot properly pair with each other or with other devices.Place the earbuds in the charging case and leave the case open. Press and hold the button on the case for 10 seconds until the earbud LED indicators flash red 3 times and then turn white. Wait until the LED indicator on one of the earbuds flashes fast while the other flashes slowly. This confirms that the reset was successful and your earbuds can be connected normally.
- LED LIGHT GUIDESteady whiteFlashing whiteFlashing red
- Customer Service24-month limited warrantyLifetime technical support
- [email protected] +1 (800) 988 7973 (US) Mon – Fri 9:00am – 17:00pm (PT)+44 (0) 1604 936200 (UK) Mon – Fri 6:00 – 11:00 (GMT)+49 (0) 69 9579 7960 (DE) Mon – Fri 6:00 – 11:00Input: 5V0.5AAnker Technology (UK) LtdSuite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA,United KingdomAnker Innovations LimitedRoom 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong KongAnker Innovations Deutschland GmbHGeorg-Muche-Strasse 3-5, 80807 Munich, Germany
APP
Download the Soundcore App to customize the user interface (e.g. adjust volume, control playback, activate voice assistant), trace HearID, adjustEQ, switch ANC modes, update firmware, and explore more.
Ensure the earbuds are placed in the charging case and the case remains open until the firmware upgrade is completed.
AMBIENT SOUND
WEARING
Choose the Liquid Silicone EarTips that fit your ears best.
CHARGING
Fully dry off the earbuds and the USB-C charging port before charging.Use a certified USB-C charging cable to prevent any damage. For wireless charging, position the charging case at the center of your wireless charger.
POWERING ON/OFF
Open the charging case, the earbuds will automatically power on. To power off, place the earbuds in the charging case and close it.
PAIRING
Open the charging case, the earbuds will automatically enter the Bluetooth pairing mode. Select “Soundcore Liberty Air 2 Pro” on your device’s Bluetooth list to connect.
CONTROLS
Pairing with another device: Place the earbuds in the charging case and leave the case open. Press and hold the button on the case for 3 seconds until the earbud LED indicators flash white to enter pairing mode.
RESET
Reset if the earbuds cannot properly pair with each other or with other devices.Place the earbuds in the charging case and leave the case open. Press and hold the button on the case for 10 seconds until the earbud LED indicators flash red 3 times and then turn white. Wait until the LED indicator on one of the earbuds flashes fast while the other flashes slowly. This confirms that the reset was successful and your earbuds can be connected normally.
LED LIGHT GUIDE
Steady white
Flashing white
Flashing red
Customer Service24-month limited warrantyLifetime technical support
+1 (800) 988 7973 (US) Mon – Fri 9:00am – 17:00pm (PT)+44 (0) 1604 936200 (UK) Mon – Fri 6:00 – 11:00 (GMT)+49 (0) 69 9579 7960 (DE) Mon – Fri 6:00 – 11:00Input: 5V
0.5AAnker Technology (UK) LtdSuite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA,United KingdomAnker Innovations LimitedRoom 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong KongAnker Innovations Deutschland GmbHGeorg-Muche-Strasse 3-5, 80807 Munich, GermanyReferences
[xyz-ips snippet=”download-snippet”]