ANKER A8365 PowerExpand 6-in-1 USB-C PD Ethernet Hub User Manual
Table of Contents
ANKER A8365 PowerExpand 6-in-1 USB-C PD Ethernet Hub User Manual
At a Glance
Item
Description
1. USB-C Connector
Connect to the USB-C port of a USB-C compatible device, such as MacBook
2. HDMI port
Connect to a device with an HDMI port to stream video at resolutions up to Hz
3. USB-C port
Connect to a USB-C device to support data transfer at speeds up to 5 Gb/s.
4. PD-IN port
Connect to a PD charger to charge your laptop or tablet
5. Ethernet port
Connect to a router or modem at 10/100/1000 Mbps
6. USB-A port
Connect to a USB-A device to support data transfer at speeds up to 5 Gb/s
7. Power indicator
Turns white when powered on
Specifications
Data Speed
5 Gbps
Supported Systems
Windows 10 / 8 / 7 / Vista / OS XP, Mac OS X 10.2 (and above), Chrome OS
Size
132 x 22.6x 18.3 mm / 5.2 x 0.9 x 0.7 in
Weight
83g/2.9oz
Important Safety Instructions
Avoid dropping.
Do not disassemble.
Do not expose to liquids.
For the safest and fastest charge, use original or certified cables.
This product is suitable for moderate climates only.
The maximum ambient temperature when using this product must not exceed 104°F / 40°C.
Open flame sources, such as candles, must not be placed near this product.
Only use a dry cloth or brush to clean this product.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A8365 is in compliance withDirective 2014/30 /EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com/productsAnker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A8365 is in compliance with the following Directives:The Restriction of the Use of Certain Hazardous Substances in Electrical and ElectronicEquipment Regulations 2012Electromagnetic Compatibility Regulations 2016
The full text of the GB declaration of conformity is available at the following internet address:https://www.anker.comAnker Technology (UK) LtdSuite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The following importer is the responsible party:Company Name: Fantasia Trading LLCAddress: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764Telephone:1-800-988-7973
IC Statement
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.