Use of an attachment not recommended or sold by the manufacturer may result in a risk of fire, electric shock, or injury to persons
At a Glance
1. USB-C connector
Connect to a MacBook’s USB-C port
2. HDMI port
Connect to a device with an HDMI port to stream video at resolutions up to Hz
3. SD card slot
Insert an SD 4.0 card to copy files to and from your MacBook
4. PD-In put
Connect to a PD charger to charge your laptop or tablet Up to 100W input
5. USB-A port
Connect to a USB-A device to support data transfer at speeds up to 10 Gb/s
6. Power indicator
Turns white when powered on
7. Audio port
Connect to earphones or other devices with a 3.5 mm connector
Specifications
Supported Systems
Windows 7/Windows 8/Windows 10,Mac OS 10.6 or later, Chrome OS
Data Speed
10Gb/s
SD 4.0 Card Slot
312Mb/s
HDMI
For computers supporting DisplayPort 1.4: Up to for a single display.
For computers supporting DisplayPort 1.2:
Up to for a single display.
DisplayPort 1.4
Important Safety Instructions
Avoid dropping.
Do not disassemble.
Do not expose to liquids.
For the safest and fastest charge, use original or certified cables.
This product is suitable for moderate climates only.
The maximum ambient temperature when using this product must not exceed 104°F / 40°C.
Open flame sources, such as candles, must not be placed near this product.
Only use a dry cloth or brush to clean this product.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A8366 is in compliance with Directive 2014/30 /EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com/productsAnker Innovations LimitedRoom 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong KongAnker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germanyhttps://www.anker.com
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.