ANKER A8394 PowerExpand 9-in-1 USB-C PD Dock User Manual

ANKER A8394 PowerExpand 9-in-1 USB-C PD Dock User Manual

 

Important Safety Instructions

  1.  Avoid dropping.
  2. Do not disassemble.
  3.  Do not expose to liquids.
  4.  For the safest and fastest charge, use original or certified cables.
  5.  This product is suitable for moderate climates only.
  6.  The maximum ambient temperature when using this product must not exceed 104°F / 40°C.
  7. Open flame sources, such as candles, must not be placed near this product.
  8.  Only use a dry cloth or brush to clean this product.

System Requirements

Compatible DevicesMacBook Air 2020/2019/2018, MacBook Pro 2020/2019/2018/2017/2016;XPS, Inspiron 7000, Latitude 7000/5000; EliteBook; Yoga X1/C900/C700,ThinkPad X390/T490/T590; Swift 7/5/3, Spin 7/5/3; ZenBook Pro Duo;NoteBook 9 Pro, NoteBook 9 Pen, NoteBook 9*The USB-C ports of host devices must support Power Delivery andDisplayPort Alt Mode.Compatible Operating SystemsmacOS 10.12 or later, Windows 8/10, iPadOS

What’s in the Box

USB-C DockUSB 3.1 C-C Cable 1 m100W Power AdapterPower CordManualQuick Start GuideHappy Card

At a Glance

  1. Kensington security slot
  2. Power Button
  3. LED Indicator
  4. Audio In and Out
  5. USB-A 3.1 Gen 1 Port (5 Gbps, 5V/1.5A)
  6. USB-C 3.1 Gen 1 Port (5 Gbps, PD 20W)
  7. USB-C Upstream Port (5 Gbps, 60W)

  1. DC-IN (100W)
  2. HDMI Port ()
  3. DP Port ()
  4. 2*USB-A 2.0 (480 Mbps, 5V/0.5A)
  5. Gigabit Ethernet

Using Your USB-C Dock

Power on Your Dock1.Plug one end of the included power adapter into the DC-IN port and the other into a power outlet.2.Press the power button. The LED will turn green.

Connect the Dock to Your LaptopConnect your laptop to the dock’s USB-C upstream port using the provided cable to access pass-through charging for laptops at a maximum output of 60W.

LED Indicator Guide

LED indicator

Description

Solid green

Powered on

Solid blue

Connected to your laptop

Off

Powered off

Port Overview

USB-C 3.1 Gen 1 PortCan be connected to USB-C compatible devices, such as an SSD (solid-state drive) or other USB storage device to provide data transfer speeds of up to 5 Gbps. Also compatible with Power Delivery 3.0 20W to charge your phone or tablet.

USB-A 3.1 Gen 1 and USB-A 2.0 PortsCharge iWatch and other accessories using USB-A 3.1 Gen 1 port(BC1.2, 7.5W). Transfer data at 5 Gbps via the USB 3.1 Gen 1 port, or at 480 Mbps via the two USB-A 2.0 ports. These ports can also be used to connect to USB devices, including USB keyboards, mice, or storage devices.

Ethernet PortConnect the dock to a router or modem at 10/100/1000 Mbps using an Ethernet cable.

Audio JackConnect earphones or other devices with a 3.5 mm AUX connector.

Connect the Dock to One or Two MonitorsConnect the dock to up to two monitors via one HDMI port and one DP port.With an HDMI port, you can connect to a monitor to stream video at resolutions up to The following table lists the supported resolutions. The resolution may vary depending on your monitor.

DisplayPort 1.4 Platform

Item

HDMI

DP

Single Display

3840×

/

/

3840×

Dual display

3840×/ 2560×

3840×/

2560×

DisplayPort 1.2 Platform

Item

HDMI

DP

Single Display

3840×/ 2560×

/

/

3840×/

2560×

Dual display

1920×

1920×

If you’re using a Windows laptop, the supported displays are as follows:

If you’re using a MacBook, the supported displays are as follows:

Package Dimensions and Weight

Size 145 × 65 × 24 mm / 5.7 x 2.6 x 1.0 inWeight 188 g / 6.64oz

Trademarks

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

NOTICE

FCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.

The following importer is the responsible party:Company Name: Fantasia Trading LLCAddress: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764Telephone:1-800-988-7973Declaration of ConformityHereby, Anker Technology Co., Limited declares that the product type A8394 is in compliance with Directives 2006/1907/EC & 2014/30/EU & 2011/65/EU.The full text of the EU declaration of conformity is available at the following internet address:https://www.anker.com

GB Declaration of ConformityHereby, Anker Innovations Limited declares that the product type A8394 is in compliance with the following Directives:The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012Electromagnetic Compatibility Regulations 2016The full text of the GB declaration of conformity is available at the following internet address:https://www.anker.comAnker Technology (UK) Ltd | Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United KingdomAnker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong KongAnker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, GermanyThis device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by