ANKER A9121 PowerPort Strip 2 mini User Manual

ANKER A9121 PowerPort Strip 2 mini

Overview

  1. Power Light
  2. AC Outlet
  3. USB Outlet

Using Your PowerPort Strip

  • When the PowerPort Strip is connected to the power outlet, the Power Light is on.

Safety

  • Do not connect PowerPort Strip to an ungrounded outlet.
  • Do not use with extension cords.
  • Do not exceed electrical ratings.
  • Use in dry locations and indoors only.
  • Install PowerPort Strip away from heat-emitting appliances such as radiators.
  • Keep children away from PowerPort Strip.

Specifications

AC Input 125V AC 60Hz 10A
AC Output 125V AC 60Hz 10A 1250W
USB Input 100-240V ~ 50/60Hz
USB Output 5V 4.8A (2.4A Max Each Port)
Size 80 x 80 x 34 mm / 3.1 x 3.1 x 1.3 in
Weight 320.6 g / 11.3 oz
Cable Length 1.5 m / 5 ft

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party.Company Name: Fantasia Trading LLCAddress: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, USTelephone: +1 (909) 484 1530

anker.com/support

Anker Innovations LimitedRoom 1318-19, Hollywood Plaza, 610Nathan Road, Mongkok, Kowloon,Hong Kong

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,