ANKER Nano II 45W Fast Charger Adapter User Manual

Table of Contents

Chimp. Fast, the MoreNano II 45WUSER MANUAL

Attention

Read all the instructions before using the product.

The product is designed for use with IT equipment only.
The maximum ambient temperature during the use of the appliance must not exceed 25°C.
Naked flame sources, such as candles, must not be placed on the product.
The disconnection from line voltage is made by an AC plug.
In case of broken plugs, the product must be disposed of.
If you want to clean the product, only use a dry cloth or brush.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
Le produit est tory, pour etre utilise avec du materiel informatique uniquement.
La temperature ambiante maximale pendant (‘utilisation de l’appareil ne doit pas depasser 25°C.
Le produit ne doit pas etre exposé a des sources de ilamme nue, notamment des boogies.
Debrancher la prise secteur.
En cas de bouchons casses, le produit doit etre mis au rebut.
Pour nettoyer le produit, utiliser uniquement une brosse ou un chiffon sec.
La prise de courant doit se situer a proximite de requipement et etre facilement accessible.
L’alimentation nest pas destine a etre tar& par requipe technique en cas de panne ou de dealt de composant (le produit peut etre mis au rebut).

Using your product

For the fastest and safest charge. use an Anker cable, your device’s original cable, or another certified cable (such as MFi).

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLCAddress: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

IC Statement

This digital apparatus complies with CAN ICES-3(B)/NMB-3(B).

Declaration of Conformity

Hereby. Anker Innovations Limited declares that the product type A2664 is in compliance with Directive 2014/35/EU & 2014/30/ EU & 2011/65/EU & 2009/125/EC & 2019/1782/EU. The full text of the EU declaration of conformity is available at the followinginternet address:https://www.anker.com

Indoor use onlyThis symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Specification

Input

100-240V – 187A 50-60Hz

Output

SW = 3.0415.0W / 9.0V =3.0A 27.0W 15.0V-3.0A 45.0W/ 20.0V= 2.25A 45.0W (45.0W Max)PPS: 3.3V-16.0V =3.0A Max (45.0W Max) 3.3V-21.0V —2.25A Max (45.0W Max)

Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong KongAnker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, GermanyAnker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom

Customer Service

18-month limited warrantyPlease note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.