ANKER PowerCore Metro Essential 20000 PD Power Bank User Manual

USER MANUALPowerCore Metro Essential 20000 PDPower BankFor FAQs and more information, please visit: anker.com/support

Product Number:A1287External Battery / Portable Charger51005002462 V01

@Anker@Anker Japan@Anker Deutschland
@AnkerOfficialnker@Anker_JP
@anker_official@anker_ip

Charging Your Phone or Tablet

Charging Your Bluetooth Earphones or Smart Watches

  1.  Enter “trickle-charging” mode: Press the power button twice or press and hold for 2 seconds. The LED indicator will turn green.
  2. Charge your devices recommended for smartwatches or Bluetooth earphones.
  3. Exit “trickle-charging” mode: Press the power button once again.

Recharging Your PowerCore

Recharge your PowerCore via a PD charger ( not included).

Specifications

Capacity 20,000 mAh /72 Wh
USB-C Input 5V= 3A, 9V = 2A, 15V = 1.2A
USB-C Output 5V = 3A, 9V = 2.22A
USB-A Output 5-6V= 3A/ 6-9V= 2A / 9-12V =1.5A
Total Output
Size 158 x 74.2 x 19.25 mm / 6.2 x 2.9 x 0.8 in
Weight 345.5 g /12.2 oz

Important Safety Instructions

When using this product, basic precautions should always befollowed, including the following:

  1.  Store product in a cool and dry place.
  2.  Do not store the product in a hot or humid environment.
  3.  Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
  4. Operating temperature should be between 32°F to 95°F / 0℃ to 35℃.
  5.  Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
  6.  If the product is not used for long periods of time, you should change and discharge once every three months.
  7.  When charging a device, the product may feel warm, this is a normal operating condition and should not be cause for concern.
  8. In normal conditions, the battery performance will decline over several years.
  9. Do not dispose of the product in heat or fire.
  10. Do not clean the product with harmful chemicals or detergents
  11. Misuse, dropping or excessive force may cause product damage.
  12. When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
  13. Be aware discharged batteries may cause fire or smoke, tape the terminals to insulate them.

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handedover to the applicable collection point for the recycling of electrical and electronic equipment.

CAUTION: Risk of explosion if the battery is replaced by an incorrect type.WARNING: The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the like. The extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that theproduct type A1287 is in compliance with Directive2014/30/EU & 2001/95/EC & 2011/65/EU.The full text of the EU declaration of conformity is availableat the following internet address:https://www.anker.com

FCC Statement

This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or moreof the following measures:

  1.  Reorient or relocate the receiving antenna.
  2.  Increase the separation between the equipment and receiver.
  3.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

(4) Consult the dealer or an experienced radio / TV  technician for help. The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764Telephone: +1 (800) 988 7973This device complies with the Industry Canada license ‐ ICES003. Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Customer Service

18-Month Limited WarrantyLifetime Technical Support[email protected]

(US) +1 (800) 988 7973 Mon-Fri 9:00 – 17:00 (PT)+971 42463266 ( Middle East & Africa) Sun-Thu 9:00 – 17:30 (GMT+4)Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,