ANKER PowerCore Slim 10000 PD
ANKER PowerCore Slim 10000 PD
PowerCore Slim 10000 PDFor FAQs and more information, please visit:anker.com/support
 |
@Anker@Anker Japan@Anker Deutschland |
 |
@Ankerofficial@Anker_JP |
 |
@Ankerofficial@Anker_JP |
Product Number: A1244External Battery / Portable Charger 51005002463 V03
Charging Your Phone or Tablet
Charging Your Bluetooth Earphones or Smart Watches
- Enter “trickle-charging” mode: Press the power button twice or press and hold for 2 seconds. The LED indicator will turn green.
- Charge your devices recommended for smartwatches or Bluetooth earphones.
- Exit “trickle-charging” mode: Press the power button once again.
Recharging Your PowerCore
Recharge your PowerCore via a PD charger ( not included).
Specifications
| Cell Capacity | 10,000mAh / 37Wh |
| USB-C Input | 5V 3A, 9V 2A, 15V 1.2A |
| USB-C Output | 5V 3A, 9V 2.22A |
| USB-A Output | 5V 2.4A |
| Total Output | 5V 3.6A |
| Size | 149.5 × 68.5 × 14.5 mm |
| Weight | 212 g |
Important Safety Instructions
When using this product, basic precautions should always befollowed, including the following:
- Store product in a cool and dry place.
- Do not store the product in a hot or humid environment.
- Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
- Operating temperature should be between 32°F to 95°F / 0℃ to 35℃.
- Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- If the product is not used for long periods of time, you should change and discharge once every three months.
- When charging a device, the product may feel warm, this is a normal operating condition and should not be cause for concern.
- In normal conditions, the battery performance will decline over several years.
- Do not dispose of the product in heat or fire.
- Do not clean the product with harmful chemicals or detergents
- Misuse, dropping or excessive force may cause product damage.
- When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
- Be aware discharged battery may cause fire or smoke, tape the terminals to insulate them.
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
CAUTION: Risk of explosion if the battery is replaced by an incorrect type.WARNING: The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. The extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit
Customer Service
 |
18-Month Limited Warranty |
 |
Lifetime Technical Support |
 |
[email protected] |
 |
(US) +1 (800) 988 7973 Mon-Fri 9:00 – 17:00 (PT)(UK) +44 (0) 1604 936200 Mon-Fri 6:00 – 11:00 (GMT) |
DOWNLOAD RESOURCES
- [pdf] User Manual PowerCore Slim 10000 PD
- Read more:
FAQ’S
They are exactly the same, except for the color. The PowerCore Slim 10000 PD is black and silver, while the PowerCore 10000 PD is silver and black.
Anker stands behind its products with an 18-month warranty. During this period, if you encounter any problems with your Anker product, you’ll receive a replacement or refund for the cost of the product.
If you have any issues with your Anker product during the first 24 months after purchase, you can get it replaced or repaired. Please note that there are some exceptions to this rule which are stated in the warranty terms.
If your product is defective or damaged during shipping, please contact us at [email protected] with your order number and a photo of the box and/or product. We will process your replacement or refund right away, free of charge. For all other cases, please visit help.anker.com for more information on how to return your item to us safely and easily.
Use the dual USB ports to charge two devices simultaneously. Rapid Recharge: Power up your PowerCore in just 4.5 hours with a USB-C Power Delivery wall charger (not included). Recharging via USB-A charger and cable (not included) will take approximately 10.2 hours.
This Power Delivery (PD) protocol was developed along with USB-C. USB-C is the physical port connection. This basically means that: Since the USB-C connector is reversible, it can be inserted into the port either way without having to flip it around just like Apple’s lightning connectors.
USB Power Delivery (or PD, for short) is a single charging standard that can be used all across USB devices. Normally, each device charged by USB will have their own separate adapter, but not anymore. One universal USB PD will be able to power a wide variety of different devices.
Anker PowerCore Slim 10000 PD, 20W 10000mAh Power Delivery Power Bank, USB-C Portable Charger for iPhone 12/12 Mini/12 Pro/12 Pro Max, S10, Pixel 3, and More (Charger Not Include)
Once the power bank is fully charged, all four LEDs will shut off. A full charging cycle takes about 6-7 hours, depending on the chosen power source (e.g. 5V/2A power charger).
It can take 3-5 hours to fully recharge the Anker PowerCore 10000.
The light im referring to is when you hold down where it shows you how much charge is on the anker hold it down for about ten sec and it goes from white to green(1 answer) A: This makes it go into trickle-charge mode which means PowerCore Metro won’t turn off while charging low-power devices.
Overcharging your power bank can cause battery damage, which results in inconsistent charging. Inconsistent charging means that your device will not charge correctly and may charge slower. If your power bank fails to charge correctly, you will also have to replace the device, leading to additional expense.
VIDEO
References
[xyz-ips snippet=”download-snippet”]