ANKER PowerExtend USB Wall Outlet 2-Outlet User Manual
WARNINGS
TO AVOID FIRE, SHOCK, OR DEATH, TURN OFF POWER AT CIRCUIT BREAKER AND MAKE SURE THE POWER IS TURNED OFF BEFORE WIRING.
Important Safety Instructions
- Intended for indoor use only.
- Use this device with copper or copper clad wire only.
- Do not exceed electrical ratings.
- Use in dry locations and indoors only.
- Install PowerExtend away from heat-emitting appliances such as radiators.
- Keep children away from PowerExtend.
At a Glance
Installing PowerExtend USB Wall Outlet 2-Outlet
Note: Make sure you shut off power before installing the wall outlet.
- This device is to be installed in a standard single gang electrical wall box (3″ x 2″ x 2½” ).
- Strip away the insulation until you have enough cable to wrap around the screw.
- Loosen the screw and connect wires correspondingly as illustrated:Connect the green (Ground) wire to the green lead.Connect the black (Hot) wire to the screw marked “HOT”.Connect the white (Neutral) wire to the screw marked “WHITE”.
- Wrap the wire around the screws tightly and then firmly secure the wires using the screws. Tightening Torque: min. 0.8 Nm
- Mount the wall outlet into a wall box using the provided screws and mount wall plate.
- Restore power at the circuit breaker.
Specifications
Electrical Rating 125V~60Hz 15A, 1875WUSB Output 5V 2.4ASize 70 × 50 × 45 mm / 2.7 × 2.0 × 1.8 in
Using PowerExtend USB Wall Outlet 2- Outlet
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party:Company Name: Fantasia Trading LLCAddress: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764Telephone: 1-800-988-7973
Customer Service
18-month limited warranty*
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
Lifetime technical support
(US) +1 (800) 988 7973 Mon – Fri 9:00am – 5:00pm (PT)(UK) +44 (0) 1604 936200 Mon – Fri 6:00 – 11:00 (GMT)(DE) +49 (0) 69 9579 7960 Mo – Fr 6:00 – 11:00 ( ) +81 03 4455 7823 – 9:00 – 17:00 ( ) +86 400 0550 036 9:00 – 17:30
For FAQs and more information, please visit:anker.com/support
Product Number: A9321 51005002714 V01
References
[xyz-ips snippet=”download-snippet”]