anko 42902102 Gaming Headphone Stand & Wireless Charger User Manual

Gaming Headphone Stand & Wireless ChargerUser Manual42902102

Features

Notice：Please read the user manual carefully before any operations and keep it for your records.

Safety instructions:

1. Do not disassemble or throw into fire or water, to avoid damage.
2. Do not use the wireless chargers in severely hot, humid or corrosive environments, to avoid circuit damage and occurs leakage phenomenon.
3. Do not place too close with magnetic stripe or chip card (ID card, credit cards, etc.) to avoid magnetic failure.
4. Please keep the distance at least 30cm between implantable medical devices (pacemakers, implantable cochlear, etc.) and the wireless charger, to avoid potential interference with the medical device.
5. Some phone cases may affect the charging performance. Ensure there is no any metal object between your phone cases or try to take it off before charging.

Packing contents:

Wireless charger x 1USB to Micro Charging cable x 1User manual x 1

Operation Instructions:

Charge a mobile phone

1. Connect a USB power adapter (not included) with DC 5V ,1A or above power adapter will be required.
2. Connect the Micro USB cable (Included) to the wireless pad.
3. Place your mobile device on the wireless charging pad to start charge.
4. To achieve fast wireless charging, connect with a QuickCharge 2.0 or above or USB power delivery USB adapter (sold separately) will be required.
5. Check the charging icon displayed on the mobile phone’s screen for the charging status.
6. Charges through lightweight cases up to 3mm thickness.

RGB LED Light Mode (Touch Switch only to control the RGB light)RGB LED light bordering the edges of the stand creating an impressive light show.Off ➨Rolling mode ➨Breathing mode ➨Off

1. RGB LED light off at the beginning when connecting to the USB power adapter.
2. RGB LED light Rolling mode: Press the Touch Switch
3.  RGB LED light Breathing mode: Press the Touch Switch again.

Charging Indicator

Specification:

Gaming Headphone Stand &Wireless ChargerInput: DC 5V, 1A or DC 9V, 1.5AOutput Power: 18W MAXUSB Output: 5W MAXInterface: Micro-USB

12 Month Warranty

Thank you for your purchase from Kmart.

Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer  Law.Kmart will provide you with your choice of a refund, repair or exchange (where possible) for this product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse, or neglect.Please retain your receipt as proof of purchase and contact our Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via  Customer Help at Kmart.com.au for any difficulties with your product. Warranty claims and claims for expenses incurred in returning this product can be addressed to our  Customer Service Centre at 690 Springvale Rd, Mulgrave Vic 3170.Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.