anko 42963264 Duck Bath Thermometer Instruction Manual

anko 42963264 Duck Bath Thermometer Instruction Manual

THIS MANUAL CONTAINS IMPORTANT INFORMATION. PLEASE READ IT CAREFULLY BEFORE USE AND KEEP IT FOR FUTURE REFERENCE.

Product Introduction

This product is a baby bath toy, with the function of intelligent water temperature measurement, can help you to accurately measure the water temperature when bathing babies. With its dual purpose, it allows your baby to play in a safe and comfortable water temperature.

Notices

• Measurement range: 0°C – 60 °C.
• Do not use the product beyond the measurement range in order to avoid danger.
• Do not completely rely on this product as your only method of measuring bath water temperature. Adult should always test water temperature by placing some water on their wrist or placing their elbow into the water before placing child into the bathtub.
• Adult supervision is required at all times.
• The product may have power shortage phenomenon after production. Please check the power before use, and charge in time if there is no power.

Operating Instructions

• The product will turn on automatically when placing in water and off automatically after removing from the water for 5 seconds. There is no on/off button. When power is on, the water temperature will be displayed numerically on the display screen. The screen will display in 3 different colours depending on whether the water is too cold, moderate or too hot.

1. Water temperature less than 35°C, the screen will display in Orange; Orange means low temperature, shown as:
2. Water temperature ranges from 35°C to 39°C, the screen will display in Green; Green means moderate temperature, shown as:
3. Water temperature over 39°C, the screen will display in Reck Red means hot temperature, shown as: 
   • The thermometer is sensitive to moisture and may remain energized even when removed from water. It is recommended to keep dry after use to ensure the display screen is off, so as to extend the service life of the product.

Battery Charging

• When the battery power is too low, the display screen will flash. Please charge the product.
• After the product is connected to power, the screen will display in red, and the charging begins. When the battery is fully charged, it displays in Green. The charging time is about 4 hours.
• Please use a charger with DC 5V = 1A voltage, USB plug.
• Charging mode: magnetic charging. After the charging head is aligned with the charging slot on the product, magnetic force will be naturally inhaled and the charging will start. Otherwise, the charging direction shall be switched, shown as:

Specifications

• Working hours: about 48 hours (standby time: about 60 days)
• Working temperature: 0°C – 60 °C
• Temperature error: ±0.5°C
• Battery capacity: 300mAh (lithium battery)
• Electric part model: HT-301

report this ad

Warnings

• Adult supervision is required at all times.
• Not for long time usage in more than 60°C environment.
• Please regularly check the charging cable, plug, shell and other related parts. Please DO NOT use this product if any signs of damage.
• Do not use the charging plug with unknown power source.
• Do not attempt to disassemble this product.
• •Please properly dispose of this product, batteries and other accessories according to local regulations. Do not treat this item as household waste.

Package Include

• x Duck Bath Thermometer
• x USB Charging Cable
• 1 x User ManualKeycode: 42963264Made in ChinaFOR AU/NZ IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND