anko Heated Pet Bed User Manual

Heated Pet BedModel no. CWD40*40-1X-12User manual

IMPORTANT INSTRUCTIONSRETAIN FOR FUTURE REFERENCE

1

IMPORTANT Safety Guards

WARNING Before using the product, please read the following instructions carefully to ensure your safety and the safety of your pet and to prevent damage to the product:

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance should not be done by children without competent adult supervision.
• Electric shock hazard exists if the supply cord is damaged or chewed by the pet. Never leave the appliance unattended during use.

IMPORTANT! The appliance is only to be used with the adaptor provided with the appliance.

• The heat pad must be kept clear of dust or other dirt particles. The appliance must be disconnected from mains power during cleaning and when storing.
• Do not use if the appliance shows any signs of damage. Heated Pet Bed must be used only with provided adaptor, LY120-120-1000A

IMPORTANT! For electrical safety, any repairs to the product must be carried out by a qualified electrical person only.

2

• For additional protection, it is strongly recommended that the use of a residual current device (RCD/safety switch) with a tripping current not exceeding 30mA be used on the circuit supplying mains power to this product.
• Remove any packaging material before using the Pet Bed for the first time. Safely dispose of all plastic bags and other packaging material that may be potentially dangerous to young children.
• The Pet Bed is intended for indoor use only.

CAUTION! Electric Shock Hazard. Never submerge the power cable and the adaptor.

Although the heated mat is watertight, it must never be submerged in water or any other liquid.

• Always disconnect the appliance from mains power before carrying out any maintenance, cleaning or when not in use for long periods of time.
• The heated mat is intended to be used only inside the bed supplied; do not use it on any other product.
• Do not crush, deform or fold the pad, this will damage the heating cable inside the pad.
• Power cable must be placed or protected to ensure it is not accessible to animals.
• Not to be used for any other purpose.
• No liability can be accepted for any damage caused by noncompliance with these instructions or any other improper use or mishandling.
• Inspect regularly and remove if damaged or shows signs of wear.
• If the supply cord is damaged, it must be replaced by a qualified electrical person in order to avoid a hazard, or the

3

product must be disposed of.

• The Pet Bed should not be operated by means of an external timer or separate remote-control system.
• Do not use with wires tucked in.
• Do not insert pins or sharp objects into the Electric Pet Bed.
• Unplug from the mains supply when not in use.
• This Pet Bed must always be kept in fully spread condition during use to avoid overheating.
• When storing, allow the Pet Bed to cool before folding. Fold gently but do not crease the Electric Heat Pad. To prevent creasing do not place any other items on top of the Heat Pad during storage.
• Do not wash the Electric Heat Pad. Clean the Pet Bed in accordance with the instructions provided under the heading `Care & Maintenance’ in this manual.

SAVE THESE INSTRUCTIONSFOR HOUSEHOLD USE ONLY

4

TECH SPECS

5

Using the Product

• Insert the Electric Heated Mat inside the special pocket of the Pet Bed then close the zip. Make sure your pet cannot remove it.
• Place the Pet Bed on a flat and regular surface.
• Make sure the Power Cable comes out of the bed without being squashed or damaged.
• Insert the Power Cable through the special hole at the back of the bed.
• Place the Power Cable so that your pet cannot bite or damage it.
• Connect the Electric Heated Mat to the adaptor and then to mains power.
• Allow the mat to heat up at least for 15-20 minutes to reach its optimum operating temperature.

THE PET BED DOES NOT HAVE THE SAME EFFECT AS AN ELECTRIC BLANKET. WARM TEMPERATURE SUITABLE FOR HUMANS COULD BE TOO HOT FOR A PET.

• For your pet’s safety, inspect regularly and remove if damaged.
• Always supervise your pet during use.

6

CARE AND MAINTENANCE

• Periodically check the product is in good working order and ensure that it has no signs of damage, especially the power cable and heated mat.
• Before storing the product allow it to cool down.
• Do not crease the appliance by placing items on the top of it during storage.
• Clean the heated mat with a soft cloth or wet sponge; do not use detergents or chemical substances.
• Wash the bed following care instructions on the product label.

CARE INSTRUCTIONS:REMOVE ELECTRICAL HEAT PAD BEFORE WASHINGWARM HAND WASHDO NOT BLEACHDRY FLAT IN SHADEDO NOT TUMBLE DRYDO NOT IRONDO NOT DRY CLEAN DRY THOROUGHLY BEFORE RE-USE OR STORAGENOT INTEDED FOR REPEATED WASHINGDIRECT CONTACT WITH PALE OR DAMP SURFACESMAY RESULT IN COLOUR TRANSFER.

7