Anko TWS Earbuds 42968283 User Manual

Anko TWS Earbuds 42968283

Includes:

• true wireless earphones
• charging case
• charging cable (micro USB )
• small & large silicone tips

Function overview

Note: Please remove insulation film from the charging terminals andcharge the earphones and case before use.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc., and any use of such marks by KMART AUSTRALIA is under license. iPhone, iPad and Mac is a trademark of Apple Inc., registered in the U.S. and other countries.

Earphone Function Operation

Power ONWhen the charging case is opened, both earphones will automatically power ON and sync up;Or when the earphones are OFF you can press and hold both buttons for 2s to turn them ON.

Power OFFPut earphones back into the charging case and close the lid, they will be automatically powered OFF;Or you can press and hold the button of either earphone for 4 seconds, both earphones will be turned OFF.

Play/Pause Press either button

Previous Track Press left button 3 times in quick succession

Next TrackPress right button 3 times in quick succession

Volume UpPress the right button 2 times in quick succession

Volume DownPress the left button 2 times in quick succession

Answer CallPress either button

Reject CallPress and hold either button for 1 second

End CallPress either button

Activating Phone AssistantPress and hold either button for 1-3 seconds

Bluetooth® Pairing

• Open the charging case, the Earphones will automatically power ON (or they can be turned on manually). The LED indicators on the left and right Earphones will flash blue and red as they automatically sync to each other. Once synced the Earphones will enter pairing mode, which is identifiable by one Earphone flashing blue and red.
• Turn the Bluetooth ON on your device.
• Select the pairing name of your Earphones on the list of available devices. Pairing name is: KM42968283.
• The Earphone LED indicator will flash blue once every 5 seconds when connected.

Trouble shooting tip

• If the Earphones do not connect to your device, turn the Earphones OFF, turn your device’s Bluetooth OFF and then back ON, then repeat the pairing process.
• Your Earphones are designed to automatically sync to each other when they are turned ON, however if they ever fail to sync, please put both Earphones back into the charging case and close the cover to turn them OFF; then open the cover and the Earphones will turn on and sync together again.

Phone CallsIf there is an incoming call on your Bluetooth device, the Earphones will pause the playback and ring to alert you of the call. Press either Earphone button to answer the call or press and hold either button for 1 second to reject the call. To end the call, press either Earphone button again.

Charging the Case

• Connect the micro USB charging cable into the socket on the Charging Case.
• Plug the cable into a standard USB 5V/1A output.
• The LCD screen on the case will show the battery charging status while the case is charging and will show 100% status when fully charged.
• When fully charged, unplug the charging cable.

Warning: To avoid damage to the Charging Case, please only use a 5V /1A charger.

Charging the Earphones

• Put the Earphones into the Charging Case. The LCD screen will show “L” and “R”, indicating that Earphones are placed correctly in the case.
• Close the charging case lid. The Earphones LED indicator will stay red while the Earphones are charging. When charging is . complete the LED will turn OFF. (Note: the Earphones come with a built-in rechargeable battery. Before using them for the first time, we recommend you fully charge the battery. A full charge takes approximately 1 hour).
• The case LCD screen will show the Earphones battery status when the Earphones are placed into the case correctly.

WARNING: The Earphones can only be used with the provided Charging Case.

Specifications:

• Model No: 42968283
• Version 5.0 Bluetooth® chipset
• Support profiles: A2 D P1.3/H FP1.6/H S P1.2/ AVR CP1.6
• Frequency Response: 20Hz-20kHz
• Impedance: 160
• Driver size: 8mm
• Sensitivity: 97dB±3dB
• Effective range: up to 10 meters
• Earbud battery capacity: 2 x40mAh
• Playing time: up to 4 hours
• Charging case battery capacity: 250mAh
• Earbud charging time: max. 1 hour
• Charging case’s Charging time: approx. 1.5 hours
• Charging port: Micro USB
• Input Voltage: DC5.0V / 1A

12 month warranty

Thank you for your purchase from Kmart.Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with the accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.Kmart will provide you with your choice of a refund, repair or exchange (where possible) for this product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect.Please retain your receipt as proof of purchase and contact our Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer Help at kmart.com.au for any difficulties with your product. Warranty claims and claims for expense incurred in returning this product can be addressed to our Customer Service Centre at 690 Springvale Rd, Mulgrave VIC 3170.Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.