Ankor Health Mini Scale User Manual

Ankor Health Mini Scale

Your new electronic personal scale has been designed to accurately indicate your weight gain or loss over a period of time and should give many years of service under normal use

Specifications

  • Battery: 2 x 1.5 V (7# Lithium) / 1 x 3V CR2032 LI
  • Equipped with a high precision strain sensor system
  • Capacity· 150kg/180kg 330LB/396LB
  • Graduation: 100g/0.2LB
  • Mini effective: 7kg
  • Weight mode: weighing automatic
  • Automatic zero resetting
  • Automatic switch off
  • Unit: Kg/lb
  • Symbol Lo boot low-voltage detection, low voltage
  • Hint of out: o-Ld,
  • Hint of wrong: —
  • Sensor damaged or circuit breaker display: LCER

Key Press

  • Key Functions: unit conversion switch program to load switch

How to Weight

  1. Remove the insulation film, put the scale on a hard & flat surface (avoid carpet of soft surface), wait. 2 seconds before weighing.
  2. Set up unit prior to use, unit can not be converted when weight.
  3. Stand on the scale in balance, you can read the result automatically when the weight is set after 3 seconds and automatically switch off after 8 seconds.

Note: Before putting the scale in the flat & hard surface, the scale is automatically switch off, you must weight automatically first.

ADVICE FOR USE AND CARE

  • When unused the scale should be left unloaded to avoid over assumption of power and failure of work.
  • Try to stand in the middle place to avoid slip.
  • Stand on the scale in good balance to avoid failure of lock and incorrect illustration.
  • No heavy knock in the scale.
  • Do not have water stains on the place or wash with water.
  • Long-term need not when, please take it out.
  • This item is only used for weighing in daily life. Do not use for legal trade.

[xyz-ips snippet=”download-snippet”]


Posted

in

by