Ant Audio TWS 721
Power On/ Off
To Power ON, Press the earbud’s surface for 5 SecsTo Power OFF, Press the earbud’s surface for 5 Secs
First Time Pairing
Step1. Take out the earbuds from the charging box or manually switch them ONStep2. Make sure both of the earbuds are charged and have blinking light indicators.Step3. Now you can connect them with your cellphone using Bluetooth, Now Search for “ Ant Audio TWS 721” and connect with the earphones
Calling Controls
Just Press on either right or left earbud to pick up or press 2 sec to hang up the call.To hang up an ongoing call, press once on the earbud.
Music Control
Press on either right or left earbud to play or pause the music.Press the left earbud 2 times, for the previous song.Press the right earbud 2 times, for the next song.Press 3 times, left and right earbuds to increase or decrease the volume.
Solutions to Common Problems
Pairing FailureCheck if the earbuds are powered ON, Also too many smart devices with Bluetooth mode ON may cause searching difficultBluetooth Earbuds Cannot be Turn ONCheck whether the earbuds and charging box are out of power and need to be charged.Earbuds Disconnection During UsageCheck the working environment between the left and the right earbud normally in barrier-free conditions, the distance is 3-5 meters.
Troubleshooting
Issue. One Earbud is not workingTo start with unpair all the devices names “Ant Audio TWS 721” from your Bluetooth menu under paired devices and start the below process.Step 1 – Take out the earbuds from the charging boxStep 2 – Press both earbuds mobile function button for, 4 SecondsStep 3 – Make sure both the earbuds lights are offStep 4 – Again Press the mobile function button for, 15 Seconds the earbuds are power ON and the lights changing patternsStep 5- Now put the earbuds in the charging case, Turn ON the Bluetooth on your cellphone and take both earbuds out of the charging boxStep 6- In your Bluetooth Menu, Under available device click ON “Ant Audio TWS 721” And enjoy the TWS Listening Experience
[xyz-ips snippet=”download-snippet”]