ANZO Headlights Instructions Manual

ANZO Headlights Instructions

Tools Needed Phillips Screwdriver , 10mm Socket and ratchet.

Remove the phillips screw holding the parking lamp in.

Remove the 10mm bolt located on the bottom of the light.

Remove the bolts from the top of the grille and the two phillips screws located at the bottom corners.

Pull the parking lamp straight out.

Pull the headlight straight out and unplug the harness from the back.

Remove the 10mm bolt from the top inner part of the light.

Remove the two 10mm nuts located behind the parking lamp.

Install your new light by reversing these instructions. Check all funtions of the light before operating on the highway.

Details:

5150 Eucalyptus Ave Unit A Chino,Ca. 91710888.360.3696Description: Crystal Headlight PartNumber: 121139 – 121132Application: 97-00 Toyota Tacoma www.anzousa.com

ANZO Headlights Instructions Manual – ANZO Headlights Instructions Manual –