Wireless Remote Switch (Double Rocker)
Quick Start Guide
Product Introduction
Wireless Remote Switch (Double Rocker) is a remote control switch with low energy consumption and a standard 86 type industrial design. Simply place or stick it almost anywhere to use. You can control Smart Wall Switch, Smart Plug, and other smart accessories with a single press, double press, or long-press of the Wireless Remote Switch.* A hub is required.* Aqara Hub is required to enable Aqara Wireless Remote Switch (Double Rocker) to work with HomeKit technology. See www.agara.com for more details.* This product is for indoor use only.
ButtonLong Press for 10s: ResetQuick Press 5 Times: Effective Range Test
Quick Setup
- Please add the Hub to the app according to the Hub Quick Start
- Please open the app, tap “Home” and then tap “+” in the top right corner to enter the “Add Device (Accessory)” page. Select “Wireless Remote Switch (Double Rocker)”, and add it according to* If the connection fails, please move the accessory closer to the Hub and try again.
Installation
Effective Range Test: Quick press any of the two buttons 5 times at your desired position. If the Hub makes voice prompts, it indicates that the accessory can communicate effectively with the Hub.* Avoid metal surfaces to maximize signal strength.Option 1: Place it directly in the desired position.
Option 2: Remove the protective film, and stick it to the desired position.
* Keep the surface clean and dry.
Specifications
Model: WXKG02LMDimensions: 86 x 86 x 15.12 mm (3.39 x 3.39 x 0.60 in.) Wireless Protocol: ZigbeeBattery: CR2032Operating Temperature: -5° — +50° COperating Humidity: 5 — 95% RH, no condensationOnline Customer Service: www.aqara.com/supportEmail: [email protected]Manufacturer: Lumi United Technology Co., Ltd.Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China
[xyz-ips snippet=”download-snippet”]