Quick Start Guide
WARNING – For anything other than the routine cleaning and maintenance described in this guide, this product must be serviceclioy a qualified professional with sufficient experience in pool equipment installation and maintenance so that all of the instructions in the product’s complete installation and operations manual can be followed exactly. All safety instructions in the complete manual must be followed explicitly in order to prevent injury hazards. Improper installation and/or operation will void the warranty. Never turn the cleaner on unless it is fully submerged in the water. Doing so will void the warranty and may cause severe damage to the cleaner motors.
For complete installation instructions, please refer to the complete user manual.
Never turn the cleaner on unless it is fully submerged in the water. Doing so will void the warranty and may cause severe damage to the cleaner motors.
 |
1. Submerge in pool |
| 2. Wait for bubbles to stop completely, then let the cleaner sink to the bottom of the pool. |
Spread all of the length of cable out over the pool to avoid tangling.
WARNING: Do not use an extension cord.
Start Cleaning
| When cleaning cycle ends, always remove the cleaner from the pool | Never lift the cleaner out of the pool by the floating cable. |
 |
 |
| 1. Unplug |  |
| 2. Untangle |  |
© 2020 Zodiac Pool Systems LLC. All rights reserved. Zodiac® is a registered trademark of Zodiac International, S.A.S.U. used under license. All other trademarks referenced herein are the property of their respective owners.
Zodiac Pool Systems LLC2882 Whiptail Loop # 100Carlsbad, CA 920101.800.822.7933AquaProducts.com
Zodiac Pool Systems Canada, Inc.2-3365 Mainway, BurlingtonON L7M 1A61.888.647.4004AquaProducts.ca
References
[xyz-ips snippet=”download-snippet”]