Aquascape Smart Pond Thermometer User Guide

Aquascape Smart Pond Thermometer User Guide

Product Overview

1. Smart Pond Thermometer
2. Smart Pond Thermometer
3. Low-voltage Transformer

Smart Pond Thermometer Specs

Safety Information

WARNING: It is recommended whenever working in or near water to have all electrical devices plugged into a ground fault interrupter (GFCI) that has been installed by a licensed electrician.

• To reduce the risk of electrical shock or damage to the thermometer, all wiring and junction connections should be made per local codes.Requirements may vary depending on usage and location.
• The power cable should be protected at all times to avoid punctures, cuts, bruises, and abrasion.
• Operating the Smart Pond Thermometer outside of the 10-15 volt operating range voids the product warranty

IMPORTANT: Aquascape, Inc. is not responsible for losses, injury, or death resulting from a failure to observe these safety precautions, misuse or abuse of pumps or equipment.

Required

• Low-voltage (12V) transformer (included with #74013)
• For use with the Aquascape Smart Control App– Adequate WiFi coverage reaching to the unit (2.4 GHz networks supported)– Aquascape Smart Control App (available on iOS or Android App Store)

Installation

• Connect the quick-connect fitting to a 12-volt, outdoor-rated transformer (included with #74013). Then, plug the transformer into a GFCI-protected outlet.
• Place the probe in the pond. It is recommended to place the probe at the bottom of the pond for a more accurate reading.NOTE: Press the F/C button on the display to switch the display readout between Fahrenheit and Celsius (Ex.4).

PAIRING PROCEDURE

• Once plugged in, the blinking blue light indicates that the unit is in pairing mode and ready to connect to the app.
• Download the Aquascape Smart Control App (available on iOS or Android App Store).
• Open the app and click ‘Create New Account’ (Ex. 1).NOTE: If you already have an account, login with your username and password.
• Once logged in, click the three dashes in the upper, right-hand corner of the home screen (Ex. 2) and click ‘Add New Device’ (Ex. 3).

• Continue to follow the on-screen instructions to complete the pairing process.NOTE: Adequate WiFi coverage is required (2.4 GHz networks supported)
• To reset the device to factory defaults, press and hold the F/C Button for ten seconds and release when the blue LED light begins rapidly flashing (Ex. 4).

Maintenance

• To ensure maximum accuracy, occasionally remove any debris or buildup from the probe.The probe cover is easily removed by twisting it counterclockwise (Ex. 5).

Troubleshooting

• Device won’t pair– Make sure the outlet is receiving power and the GFCI is not tripped– Ensure adequate wireless coverage (2.4 GHz networks supported)– Make sure the password is correct for the network (case sensitive)– Reset the device to factory defaults (press and hold F/C Button for ten seconds)

Replacement Parts

Warranty Information

3 YEAR WARRANTY 

Aquascape warrants that the Smart Pond Thermometer will be free of manufacturing defects for three years from date of purchase. Proof of purchase required. Warranty does not cover damage resulting from negligent handling, misuse, or lack of reasonable maintenance or care. If upon Aquascape’s inspection, product shows evidence of a manufacturing defect, Aquascape’s liability is limited, at Aquascape’s option, to the repair of the defect, replacement of the defective product, or refund of the original purchase price. The warranty excludes costs of labor, removal of product, shipping and expenses related to the installation and re-installation of the product. No liability for loss or damages of any nature or kind, whether arising out of or from the use of the product, whether defective or not defective, is assumed by Aquascape, Inc. or its affiliates. Aquascape shall not be liable for any incidental, consequential, or other damages arising under any theory of law whatsoever.

For more information about our company or products, please visit our website ataquascapeinc.com or call us at US (866) 877-6637 CAN (866) 766-3426©2020 Aquascape, Inc. • All Worldwide Rights Reserved

References

• 
  Water Features, Outdoor Fountains, Pond Pumps by Aquascape
• 
  Water Features, Outdoor Fountains, Pond Pumps by Aquascape