AQUATHUMP Waterproof Speaker User Manual
DIAGRAM (Figure 1)
- Volume Down (short press) Previous Track (long press)
- Play / Pause (short press) Power On/Off (long press)
- Volume Up (short press) Next Track (long press)
- Micro USB Charging Port
- 3.5 mm Audio Port
PAIRING YOUR SPEAKER
Turn on the speaker by holding the power button (Figure 1.2) down for approximately 3 seconds; you should hear a power-up noise and see a flashing blue LED light on the front of the speaker to indicate that the device is on and ready to pair. In the wireless pair settings of your mobile device, connect to the device named “Aquathump”. You will hear a noise and see the blue LED light turn solid, ensuring a successful pair. The speaker will automatically turn off if no devices are paired after 13 minutes. To connect to a new device, (while turnedoff) hold down the power button for 5 seconds until you hear two beeps. This tone means it’s scanning for a new device.
CHARGING YOUR SPEAKER
Connect the USB charging cable to a power source and insert the micro USB tip in the charging port located underneath the port flap. Let the Aquathump reach full charge(approximately 2.5 hours if the battery was completely drained) before use. The LED light will turn red while the speaker ischarging, and turn off once fully charged.
PRODUCT FEATURES
- Wireless functionality with 33 foot range
- Up to 4 hours of audio playtime from a single charge
- Built-in rechargeable battery
- Compatible with smart devices
- Waterproof when port flap is completely sealed (submerged up to 1 meter)
- Carabiner clip for easy portability
SAFETY POINTERS
- The waterproof feature of this speaker is only true when the port flap is completely sealed. Also, do not allow water to come into contact with the ports (Figures 1.4and 1.5); this may cause irreparable damage to your speaker.
- Do not disassemble, modify, or alter this product in any way. Doing so may cause undersireable effects such as electric shock, product malfunction, or firehazards. Not to mention, it’ll void your warranty.
- Do not put the electrical cords near water. Although the Aquathump is waterproof under code IPX67, using the electrical cords near water is highly discouraged.NOTE: IPX67 waterproof rating is IEC standard 60529. Compliant standards mean that this product resulted in no damage when submerged in water at a depth of 1 meter for 30 minutes.
SPECIFICATIONS
- Dimensions: W 0.87 x L 5.10 x H 2.75 in
- Weight: 6 lb 25 oz
- Playtime: 4 hours (@ 65% Volume)
- Frequency Response: 100Hz to 20kHz
- Speaker Drivers: 50mm
- Output Power: 5W
- Wireless Range: 33 feet
- Wireless Connection: V5.0+EDR
- Battery: Lithium ion, 3.7V / 800mAh
- Battery Charge Voltage: DC5V/1A
- Charging Time: 2.5 Hours
- Waterproof Rating: IPX67
Read More About This Manual & Download PDF:
References
[xyz-ips snippet=”download-snippet”]