Arlo Audio Doorbell Instruction Manual

Arlo Audio Doorbell

View a video tutorial

To view a video tutorial, scan this QR code or use your browser to visit Arlo support for your country and click the Arlo Doorbell..For more information, look for How do I set up my Arlo HD camera with an Arlo Audio Doorbell?.

www.arlo.com/en-us/countries-support.aspx

What’s in the box

Get the Arlo mobile app

You must use the app to install your Arlo Audio Doorbell. The app provides step-by-step instructions.

Power your doorbell and add it to your Arlo account

  1.  Insert two AA batteries into your doorbell. Your doorbell runs on battery power.
  2. Use your app to set up your Arlo Doorbell and add it to your account.

Mount your doorbell without wiring

  1.  Secure the battery cover on your wall using the provided screws.
  2. Attach the doorbell to the battery cover.
  3.  Secure the Arlo doorbell with the screw on the bottom of the battery coverNote: To mount your doorbell with wiring, see page 8.

Connect your Arlo doorbell to trigger your existing chime (Optional)

You can connect your Arlo doorbell to existing mechanical or electronic doorbells if they operate at a voltage between 8 and 24 volts AC. After you connect your doorbell, press the button on your Arlo doorbell to trigger your existing chime

Set the chime switch

Determine whether you have a mechanical or a digital chime.Mechanical chimes usually make a sound like ding dong. Digital chimes can have a variety of sounds, some can play tunes.1. If you have a mechanical chime, set the chime switch to position 2.2. If you have a digital chime, set the chime switch to position 1.

Connect the doorbell battery cover to your existing chime

  1. Turn off the power to your current doorbell at the breaker.
  2. Remove your current doorbell.
  3. Connect the wires coming out of the wall to the terminals on the back of the Arlo doorbell battery cover with the screws we provideIf the wires are too short, use the accessories provided.
  4. Feed the wires back into your wall.
  5. Secure the Arlo battery cover to the wall using the mounting screws.
  6. Turn the power on at the breaker

Attach the doorbell to the battery cover

  1. Attach your doorbell to the battery cover.
  2. Press the doorbell button, listen for a chime. If you don’t hear a chime, remove the doorbell from the battery cover and adjust the chime switch to position 3. Reattach the doorbell, press the doorbell button, and listen for a chime
  3. Secure the Arlo doorbell with the screw on the bottom of the battery cover.

Use your Arlo app

  • Use your app to set up and manage all your Arlo devices and your Arlo account.
  • To view tutorial videos, find troubleshooting tips, or get support, scan the QR code or use your browser to visit Arlo support for your country.http://www.arlo.com/en-us/countries-support.aspx
  • (If this product is sold in Canada, you can access this document in Canadian French at arlo.com/docs.)
  • For regulatory compliance information including the EU Declaration of Conformity, visit www.arlo.com/about/regulatory/
  • To view regulatory information from the Arlo app, tap Devices, select your device, open the Device Settings menu, and tap Device Info/Regulatory.
  • Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are trademarks of Arlo Technologies, Inc. Other trademarks are for reference purposes only.
  • This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2APLE18300388IC ID: 23815-18300388

Arlo Technologies, Inc.2200 Faraday Ave. Suite 150Carlsbad, CA 92008 USAwww.arlo.comwww.arlo.com/support

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,