arlo wireless Home Security Camera System with Siren User Guide

arlo wireless Home Security Camera System with Siren User Guide

WelcomeThank you for choosing Arlo Pro 2. Getting started is easy.

What’s Included

  • Base station
  • Base station AC power adapter
  • Ethernet cable
  • Arlo Pro 2 Wire-Free Camera
  • Rechargeable battery
  • Camera AC power adapter
  • Camera power adapter cable
  • Magnetic wall mounts
  • Mounting screws

Use Your Camera Wire-Free

You can use your camera wire-free, powered by the battery, or while plugged into an AC power outlet.

Before using your camera wire-free, you must insert the battery.

Note: You do not need to insert the battery if you are connecting your Arlocamera to an AC power outlet.

To install the battery:
  1. Unlock the battery compartment by pressing and holding the latch.
  2. Gently pull the battery door back to open the compartment.
  3. Align the battery contacts.
  4. Insert the battery.
  5. Close the battery door.

Note: The Arlo battery is fully charged when it leaves the factory

Get the App

For the best experience, download the Arlo app for your smartphone by scanning this QR code or searching for Arlo in the app store.

https://my.arlo.com/#/login

Note: If you already use the Arlo app, make sure that you are using the latest version. To find out if an update is available, go to the app store and search for Arlo.

Connect Your Base Station to the Internet

  1. Connect the base station to your router using an Ethernet cable.
  2. Connect the base station AC adapter to your base station and plug it in.
  3. Turn the base station on by pressing the On/Off button.
  4. The Power LED and Internet LED on the front of the base station light green in about two minutes.

Get an Account

To create a new Arlo account:

  1. Launch the Arlo app from your smartphone, tap the New to Arlo? button, and select Arlo Wire-Free.If you are using a computer, visit https://my.arlo.com/#/login.
  2. Follow the onscreen instructions.
To add an Arlo Pro 2 camera to an existing Arlo account:
  1. If you already set up an Arlo account, log in, and click or tap Add Device.
  2. Follow the onscreen instructions.

Sync Your Cameras With the Base Station

  1. Bring the camera within 1 to 3 feet (30 to 100 centimeters) of thebase station.Note: Cameras must be synced one at a time.
  2. Press the Sync button on the top of the base station for about two seconds and then release the button.
  3. Wait for the Sync Status LED to blink green.
  4. Press the Sync button on top of the camera for about two seconds and then release the button.

A blue LED on the camera blinks slowly when the sync process starts. The blue LED blinks rapidly to confirm syncing.The camera is ready for viewing.

The LED blinks amber if the sync is not successful. You must repeat the sync process.

Syncing more than one camera?

Go and repeat steps 1 through 4 for each camera.

Select a Good Spot for Your Camera

Place your Arlo Pro 2 camera in a location with a clear, unblocked field of view and with a good signal to the base station.

Note: Your wireless range varies depending on environmental factors, including physical obstructions, construction materials, and wireless interference.

Place or Mount Your Cameras

You can place your camera on a shelf or other flat surface, or you can mount it to the wall.Tip: Use the Arlo app in Position mode (found in Camera Settings) to help aim the camera.

To mount your camera to the wall:

Fasten the mounting screw into the wall, and hang the magnetic mount from the screw.If you’re mounting the camera to drywall, be sure to use the plastic drywall anchors that are provided.

Charge Your Arlo Battery

The Arlo battery is fully charged when it leaves the factory.

To recharge the battery:
  1. Place the camera indoors. If you are using the camera outside, bring it inside while charging the battery.
  2. Connect the power adapter cable to the camera power adapter.Note: You must use an Arlo Pro 2 power adapter and cable to charge the battery.
  3. Connect the other end of the adapter cable to the camera.
  4. Plug the power adapter into an electrical outlet.The camera LED lights solid blue when the camera battery is fully charged.

Use Your Camera Plugged In

To use your camera plugged in:
  1. Place the camera indoors.
  2. Connect the power adapter to an AC electrical outlet.

You’re Done!

Congratulations! Your Arlo System is set up and ready to go.

To view useful tutorial videos, find troubleshooting tips, or get support, visit arlo.com/support/.

Base Station LED Guide

Power
  • GreenThe base station is powered on.
  • Blinking greenA firmware update is in progress. DO NOT TURN OFF THE BASE STATION OR CAMERAS.
  • AmberThe base station is booting.
  • OffThe base station is powered off.
Internet
  • GreenThe base station is connected to the Internet.
  • Blinking greenThe base station is sending or receiving data over the Internet.
  • AmberThe base station is connected to the router but did not establish an Internet connection.
  • OffThe base station is not connected to your router.
Camera
  • GreenCameras are connected to the base station.
  • Blinking greenThe base station is attempting to sync with a camera.
  •   Blinking amberA camera is too far from the base station. Signal strength is weak.
  • OffNo cameras are detected..

Compliance

For regulatory compliance information including the EU Declaration of Conformity, visit www.arlo.com/about/regulatory/.

Arlo International, Ltd.Floor 3, Building 3 University Technology CenterCurraheen Road, Cork, Ireland

Arlo Technologies, Inc.2200 Faraday Ave. Suite 150Carlsbad, CA 92008 USAwww.arlo.comwww.arlo.com/support

 

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

,