SBG6950AC2 Cable Modem and Wi-Fi Router
QUICK START GUIDE
Wi-Fi Cable Modem SBG6950AC2 SBG7400AC2 SBG7600AC2
In the box
Wi-Fi cable modem
SBG6950AC2SBG7400AC2SBG7600AC2
Power adapter
Software License & Warranty card
Quick Start GuideSBG6950AC2SBG7400AC2SBG7600AC2
Status indicators
Front panel LEDs
LED status indicators
Power 
On Power is properly connected to the Wi-Fi cable modemSend Receive 
On Upstream (send) and Downstream (receive) statusOnline 
On Wi-Fi cable modem is connected to the network2.4 GHz Wireless 
Flash 2.4 GHz wireless connection is made between the Wi-Fi cable modem and your Wi-Fi device5 GHz Wireless 
Flash 5 GHz wireless connection is made between the Wi-Fi cable modem and your Wi-Fi device
Note: Detailed LED status information is available online in the SBG6950AC2, SBG7400AC2, & SBG7600AC2 User Guide at the ARRIS support website, www.arris.com/selfhelp.
Note: If the Send/Receive LED is flashing, this indicates that the firmware for your Wi-Fi cable modem is updating. You may not be able to access the Internet during the firmware update. To access the Internet, please wait 10 to 15 minutes for the firmware update to finish.The SBG6950AC2, SBG7400AC2, and SBG7600AC2 do not support Digital Subscriber Line service (twisted pair telephone phone service) and also do not support Satellite Internet service.
Get started
This SURFboard device is a combination of DOCSIS 3.0 cable modem and four-port Ethernet router with Wi-Fi. It uses DOCSIS 3.0 technology to provide ultra high-speed Internet access on your Wi-Fi home or small business network.
Using the connection capabilities of the Wi-Fi cable modem, you can connect your computer and other network-enabled devices via the four Ethernet ports or the 2.4 GHz and 5 GHz Wi-Fi connections. The Wi-Fi cable modem connects to the existing coaxial cable connection in your home.
Note: For Internet connections, you need a cable service connection (coaxial cable line) with a cable Internet service provider. The SBG6950AC2, SBG7400AC2, and SBG7600AC2 will not operate with a Digital Subscriber Line service (DSL) (twisted pair phone line) or Satellite Internet service.
AConnect a coaxial cable (not included) to a cable wall outlet or an RF splitter (not included) and to the Cable connector on the rear of your Wi-Fi cable modem.
Tighten the connector by hand.
BConnect the power adapter to the Power port on the rear of your Wi-Fi cable modem and then plug it into an electrical wall outlet that is not controlled by a wall switch to power on your Wi-Fi cable modem.
Your Wi-Fi cable modem will automatically power ON when the power adapter is connected.
C(Optional step) Connect an Ethernet cable (not included) to any Ethernet port on the rear of your Wi-Fi cable modem and the Ethernet port on your PC or laptop.
Note: Alternatively, you can connect your PC or laptop to the Internet via your existing Wi-Fi connection.
DCheck the front panel LEDs on your Wi-Fi cable modem. After a brief pause, the first three LEDs should light up SOLID blue.The 2.4 GHz and 5 GHz wireless LEDs will light up SOLID when Wi-Fi connectivity is available and ready.
ENote: For Internet access, you will need a cable service connection.Activate your new Wi-Fi cable modem; choose one of the following options:· Call your cable service provider. · Connect to your cable operator’s activation website using your computer or laptop:Power ON your computer or laptop and log in.Enter your service provider’s web browser URL:
- Comcast/Xfinity: www.xfinity.com/activate
- Cox: www.cox.com/activate
- Spectrum: spectrum.net/selfinstall
Set up your Wi-Fi network connection
Do the following to set up your Wi-Fi network connection:3.1 Download ARRIS SURFboard® Manager3.2 Connect using your Wi-Fi enabled device
3.1Download ARRIS SURFboard® Manager mobile appDownload the iOS or android version of the ARRIS SURFboard Manager mobile app for your iOS or android Wi-Fi enabled device to set up your Wi-Fi home or small business network connection.
AUse the ARRIS SURFboard Manager mobile app (see page 19) or the Web Manager for your SBG6950AC2, SBG7400AC2, or SBG7600AC2 (see page 25) to set the same network name and password, if you are replacing the router or the Wi-Fi cable modem in an existing Wi-Fi network. This will ensure that your Wi-Fi devices will automatically connect to your new SBG6950AC2, SBG7400AC2, or SBG7600AC2 Wi-Fi network.
BDownload the ARRIS SURFboard Manager mobile app from the Apple app store or Google play store. Scan the SURFboard Manager mobile app QR code to download the mobile app on your iOS or android mobile device:Open the ARRIS SURFboard Manager mobile app and follow the prompts to configure your SBG6950AC2, SBG7400AC2, or SBG7600AC2.
3.2Connect using your Wi-Fi enabled device! Some of the selections used in this procedure may vary slightly depending on your Wi-Fi enabled device and operating system. Please make sure to select the most applicable selections on your Wi-Fi enabled device.
AAccess the Settings screen on your Wi-Fi enabled device and then select: Wi-Fi, Wireless, or Connections.Check that Wi-Fi or Wireless is set to ON.
BSelect the SBG6950AC2, SBG7400AC2, or SBG7600AC2 Wi-Fi network from the list of available Wi-Fi networks.
CEnter your Wi-Fi network password in the Password field and select Join or Connect.This is the password that you set up during the Wi-Ficable modem activation.
4 Web Manager
AManage your SBG6950AC2, SBG7400AC2, or SBG7600AC2 using the Web Manager.Open a web browser (e.g., Internet Explorer, Google Chrome, etc.) on your connected computer or laptop and then type 192.168.0.1 in the address bar. The default login is case-sensitive:User name: admin Password: passwordChange the default Web Manager password located under Basic Setup, Login Settings and then click Apply to update your login password.
BCustomize the default Wi-Fi network name or SSID (ARRIS-####) for your Wi-Fi home network after installing your Wi-Fi cable modem and setting up your network connection(s). Note: You have the option to either keep the default Wi-Fi network name or create a new network name to help you to easily identify your Wi-Fi home network. Note: When opening the Web Manager, the Untrusted Certificate pop-up may display. If it does, you must accept it to open the Web Manager.For additional assistance with your Wi-Fi cable modem, ARRIS is available to help. Choose one of the following:
- Visit www.arris.com/selfhelp for self help, FAQs, product manuals, live chat, and email support.
- Call us at 1-877-466-8646.
CVerify Wi-Fi cable modem connectivity by accessing the Internet on your connected PC or laptop.
Visit any public web page such as www.surfboard.com. If the web site fails to open, please contact your service provider to set up your Internet service or activate your Wi-Fi cable modem.
Wi-Fi cable modem label
report this adIf the label is not attached, please check the bottom of your Wi-Fi cable modem.© 2020 CommScope, Inc. All rights reserved. ARRIS and the ARRIS Logo are trademarks of CommScope, Inc. and/or its affiliates. All other trademarks are the property of their respective owners. No part of this content may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from CommScope, Inc. and/or its affiliates (“CommScope”). CommScope reserves the right to revise or change this content from time to time without obligation on the part of CommScope to provide notification of such revision or change. CommScope provides this content without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. CommScope may make improvements or changes in the products or services described in this content at any time. The capabilities, system requirements and/or compatibility with third-party products described herein are subject to change without notice.ARSVD01735-j 28
References
[xyz-ips snippet=”download-snippet”]