AstroAI ASITIRETRGA Heavy Duty Digital Gauge with Blacklight Instruction Manual

HEAVY-DUTYDIGITAL GAUGE WITH BACKLIGHTINSTRUCTION MANUAL

IMPORTANT:Please read this manual carefully before using this tire gauge and save it for reference.You are welcome to contact us with your question via [email protected].

READ ALL THE FOLLOWING NOTES IN THIS MANUAL. PLEASE HEED ALL WARNINGS MENTIONED, EVEN IF YOU ARE FAMILIAR WITH  HANDLING ELECTRONIC DEVICES. KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.

Tire Care and Safety

  • A Safer Drive – Properly inflated tires help improve vehicle handling, steering, and braking because they allow more tread to make contact with the road.
  • Tire Integrity – Under-inflated tires reduce tire tread life.
  • Fuel Economy – Under-inflated tires increase fuel consumption, resulting in greater
  • spending.Go Green – Properly inflated tires help the wheels turn more easily, which improves

Checking Your Tire PressureWhen checking your tire pressure, you should be mindful of the following:

  • The manufacturer-recommended PSI for the tires is located on the vehicle placard.
  • Tire pressure is affected by temperature. AS a result, for accuracy, it is best to check your tire pressure when the tire is cold or the vehicle has not been driven for a while.

PRODUCT DESCRIPTION

This tire gauge is designed for momentary use only. It is not waterproof, and prolonged use in the rain or snow should be avoided.

1. Nozzle 3. Power button
2. LCD display 4. Durable rubber-grip handle

SPECIFICATIONS

Range: 0-230PSIOperating Tempersture: -5to 50C (23F 122F)Power: 2 x AAA batteries

PACKAGE CONTENTSHeavy-duty digital gauge with backlight 2 x AAA batteries

OPERATING INSTRUCTIONS

  • Press the “ON/ AUTO-OFF” button. Wait for”0.0″PSI or “0.00” Bar or”0″ KPA display
  • Place the nozzle of the gauge over the tire valve. Press firmly to ensure a good seal and prevent air from escaping. Hold gauge on the valve until the reading on the LCD display locks.
  • Remove the gauge quickly from the valve and read pressure.
  • To retake the reading, simply place the nozzle over the tire valve again and repeat.
  • Gauge will automatically shut off 20 or 60 seconds after use. The gauge can be manually turned off by holding the “ON” button down for more than three seconds.

Inflate

  • If the gauge reads a lower pressure than what is recommended on the placard, you should inflate the tire accordingly

IMPORTANT NOTE:Only use the gauge to measure tire pressure when the vehicle is in park.

Cleaning

  • Clean the nozzle by wiping it with a soft, clean, dry cloth. Do not expose the gauge to direct sunlight. Do not use in wet conditions. Replacing the Battery
  • Remove the batteries cover (1) located on the rear of the gauge handle.
  • Insert 2x AAA batteries
  • Place the battery cover back in position.

BATTERY DISPOSALTo protect the environment, the battery should be disposed of properly once it is no linger of use.

NOTEFor safety and reliability, do not mix a new battery with an old one.

STORAGE

  • Store the gauge in a dry, clean area. Avoid high humidity.
  • Avoid humidity and extreme cold, as prolonged exposure will affect the accuracy of the gauge.

ENVIRONMENTAL CONCERNS

Should your tire gauge need replacement after extended use, do not dispose of it with domestic waste. Dispose of it in an environmentally safe way. Used electronic products should not be disposed of with household waste. Please recycle where facilities exist.Check with your local authority or retailer for recycling advice.

1 Year Warranty by AstroAI

report this ad

Contact us: Thank you for purchasing the AstroAI Outdoor Photocell Countdown Timer. If you experience the need for any kind of help or support from our Customer Service  Team, please email us at [email protected] and we will be sure to get back to you as soon as possible. Thanks again!

AstroAI always wants to provide our customers with excellent products as well as customer service. To know more about us, please visit astroai.com

References

[xyz-ips snippet=”download-snippet”]