This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
Safety Certifications
CE Marking
China RoHS EFUP Labeling – 10 Years
C-Tick Mark
BSMI Certification
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.
DO NOT throw the mouse in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions.
Package Contents
Check your ASUS Strix Tactic Pro Gaming Keyboard package for the following items:
ASUS Strix Tactic Pro Gaming Keyboard
Quick Start Guide
Driver Installation CD
If any of the above items is damaged or missing, contact your retailer immediately
System Requirements
To ensure a successful installation of ASUS Strix Tactic Pro Gaming Keyboard, your computer must meet the following requirements:
PC with an available USB2.0 port
150MB available HDD space
CD-ROM drive (or DVD-ROM) drive for CD installation
Product Features
Full mechanical key switches
1000Hz polling rate (1ms response time
NKRO extreme anti-ghosting
Individual backlit keys with adjustable brightness
21 Fully Programmable Macro keys
10 Macro keys on the left
3 Thumb Macro keys below space-bar
F1-F8 Macro keys under Macro Mode (refer to section Customize)
On-The-Fly Macro recording (only keyboard commands can be recorded)
3 hardware profiles & unlimited software profiles
3 On-The-Fly switching profiles
Dedicated media controls
Knowing your Strix Tactic Pro Gaming Keyboard
Your ASUS Strix Tactic Pro Gaming Keyboard comes with the following functions keys:
M1~M10 Left Macro Keys
M14~M21 Macro Keys (F1~F8)
Indications LEDs
Macro Mode Key (switching F1~F8 to Macro Keys)
Gaming Mode Key (disabling Windows Key)
Profile Keys
Media Control Keys
Backlit Keys Brightness Control keys
NKRO Key
On-the-fly Macro Recording Key
M11~M13 Thumb Macro Keys
Using Your Keyboard
Driver Installation
To install the driver:
Connect the Strix Tactic Pro keyboard to your computer.
Insert the installation CD into your computer’s optical drive.
Locate and run the installer from the installation CD.
Follow the onscreen instructions to finish the installation.
Special hotkeys
Adjusts the LED brightness of your keyboard.
Disables the Windows® key to prevent accidental usage during gaming sessions.
Switches F1 ~ F8 keys into macro keys.
Fn key combined with any of these keys allow you to quickly switch between your customized profiles.
Allows you to turn on the extreme NKRO anti-ghosting feature, which allows any keys to be registered simultaneously
On-the-fly Macro Recording
To create a macro on-the-fly:
Press and simultaneously to start recording.
The indication LED lights up to show that the device is ready to record.
Press the keys that you wish to record.
Press and again to stop recording.
The indication LED starts blinking, indicating that the device is ready to save the macro.
Press the Macro key that you wish to assign the macro to save.
NOTE: Macro sequences contain keyboard commands only under Hardware Mode
Driver Configuration
Modes
ASUS Strix Tactic Pro keyboard provides Hardware Mode and Software Mode.
Software Mode allows you to create and save profiles and settings in your computer. It also provides other useful functions such as program correlation and profile
Hardware Mode allows you to store three customized profiles in the keyboard onboard memory, which is useful when:
You want to keep your keyboard settings while connecting your keyboard to a computer that has not installed the keyboard driver.
You are going to use the keyboard for a competition that does not allowsoftware-based drivers and macros.
You are playing games with anti-cheating mechanism, which detects software drivers as cheating plug-ins.
NOTE: Macro sequences contain keyboard commands only in the Hardware Mode
TIP: You can save three customized profiles in the keyboard memory under hardware mode and switch to software mode for normal use. When you use the keyboard on a new computer or play games with anti-cheating mechanism that prohibit the use of software-based drivers and macros, you can switch to Hardware Mode immediately.
Keyboard tab (Software Mode)
The Keyboard tab (Software Mode) provides an interface for profile settings and subtab Customize.
Profile settingA profile allows you to store settings such as button function assignments. You can also assign one profile to a specific program, so the keyboard automatically loads that profile when you launch the program.
CustomizeThe Customize sub-tab allows you to assign different functions to the macro buttons and save the changes to the current profile automatically. Refer to the following customization options and descriptions.
Items
Descriptions
Keyboard Function (Macro keys)
Press to change the button functions into other keyboard keys. You may also include modifier keys such as Ctrl, Shift, Alt or any of the combinations with keyboard keys, such as Ctrl + v.
Macro (Macro keys)
Press to assign a pre-recorded macro to the button. The PLAYBACK OPTION allows you to choose the behavior of a macro. Refer to Macro tab on the next page to learn more about creating macro commands.Press to simulate the keyboard functions, such as Ctrl, Shift, Alt or any other keyboard combination functions such as Ctrl + v.
Launch program (Macro keys)
Press an assigned button to launch a website or a program. To launch a program, you need to select the executable file (*.exe file) from the Windows Explorer.
Disable (Macro keys)
Press to disable the macro button completely.
Profile (profile hotkeys)
Press to assign three profiles to these three profile keys.
Keyboard tab (Hardware Mode)
The settings in the Hardware Mode are similar to those in the Software Mode, with some slight differences.In Hardware Mode, there are only three profiles available, and after you are satisfied with the changes that you have made, you may press the save button to save this profile settings into the keyboard on-board memory.
Macro tab
The Macros tab allows you to create macro profiles with different keystrokes and button presses. It also allows you to create numerous macros and long macro commands.
NOTE: Macro sequences contain keyboard commands only in the Hardware Mode.
Creating a Macro
To create a new macro, press the button and input a macro name in the field below Macro Name. To remove a macro, press the button . Press the button to display Copy, Import & Export.To create a macro command, click the button to record all your keystrokes and button presses in the macro window automatically. Click the button to end the macro command.The Macro tab contains different delay options for creating macros:
Record Delay – The actual delay between commands is recorded as it is.Default Delay – The delay between commands is your predefined time (in seconds).No Delay – There is no delay between commands.
Editing a Macro
The macro commands of keystrokes or button presses are listed sequentially. Click to edit a command and click to remove a command. Click or to move the command up or down.Select one of the following ways to add an additional command in a macro:
Click button.When a new display window appears, select the command that you want to insert before or after the highlighted macro command, including time delays.
Click button to record a new set of sequences.
Safety and Maintenance
Safety Guidelines
If your device does not work properly and troubleshooting does not work,unplug the device and contact the ASUS Service Center for assistance. DO NOT attempt to service or fix the device yourself
DO NOT disassemble the device as doing so will void its warranty.
Keep the device away from liquid, humidity or moisture. Operate the device only within the specific temperature range of 0oC (32 oF) to 40oC (104 F).
Maintenance and Use
The Strix Tactic Pro gaming keyboard requires minimum maintenance to keep it in optimum condition. We recommend that you clean it once a month using a soft cloth or cotton swab with a bit of warm water. DO NOT use soap or harsh cleaning agents.