ASUS TUP-GTX1660TI-06G Gaming Graphic Card Installation Guide
Card installation
- Power off your computer and unplug the power cables.
- Remove the chassis cover and locate the PCI Express slot.
- Remove the expansion slot cover of the appropriate slot for your graphics card.
- Insert the card into the slot until it is firmly in place.
- Secure the card into the slot with a screw.
- Replace the chassis cover and connect the monitor cable.
- Reconnect all power cables.
Note
If your graphics card has an auxiliary power connector, connect the appropriate power plug from the system power supply to the graphics card’s auxiliary power connector.
Connecting display devices
Connect the monitor signal cable to the corresponding port on the graphics card. Refer below for the VGA standard connectors and their corresponding ports.
Driver installation
- Visit the ASUS support site at: https://www.asus.com/support/.
- Click on Graphics Cards, then select your product series and product model.
- Click on Driver & Utility, choose the operating system, then download and install the latest driver
Note
- Refer to the graphics card manual for detailed instructions.
- The graphics card photos in this document are for your reference only,they may not be of the same model as the one you purchased.
References
[xyz-ips snippet=”download-snippet”]