ASUS USB Monitor User Guide
MB169B+
USB Monitor
User Guide
Table of contentsNotices …………………………………………………………………………………………… iiiSafety information ………………………………………………………………………….. ivCare & cleaning ……………………………………………………………………………….. vTakeback services ………………………………………………………………………….. vi1.1 Welcome! ………………………………………………………………………….. 1-11.2 Package contents ………………………………………………………………. 1-11.3 System requirement …………………………………………………………… 1-21.4 Monitor introduction ………………………………………………………….. 1-31.4.1 Front view …………………………………………………………….. 1-31.4.2 Auto-Rotate …………………………………………………………… 1-42.1 Adjusting the monitor ………………………………………………………… 2-12.2 Connecting the USB cable …………………………………………………. 2-22.3 Installing driver …………………………………………………………………. 2-33.1 Specifications ……………………………………………………………………. 3-13.2 Troubleshooting (FAQ) ………………………………………………………. 3-2
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC.(“ASUS”).Product warranty or service will not be extended if: (1) the product is repaired, modified oraltered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2)the serial number of the product is defaced or missing.ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.Products and corporate names appearing in this manual may or may not be registeredtrademarks or copyrights of their respective companies, and are used only for identification orexplanation and to the owners’ benefit, without intent to infringe.
NoticesFederal Communications Commission StatementThis device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions:• This device may not cause harmful interference, and• This device must accept any interference received includinginterference that may cause undesired operation.This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordancewith manufacturer’s instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment to an outlet on a circuit different from that towhich the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Canadian Department of Communications StatementThis digital apparatus does not exceed the Class B limits for radionoise emissions from digital apparatus set out in the Radio InterferenceRegulations of the Canadian Department of Communications.This class B digital apparatus complies with Canadian ICES-003.
Safety information• Before setting up this USB monitor, carefully read all the documentation that came with the package.• To prevent fire or shock hazard, never expose this USB monitor to rain or moisture.• Never try to open this USB monitor cabinet.• Before using this USB monitor, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.• Avoid dust, humidity, and temperature extremes. Do not place this USB monitor in any area where it may become wet. Place this USB monitor on a stable surface.• Never push objects or spill liquid of any kind into the slots on this USB monitor cabinet.• If you encounter technical problems with this USB monitor, contact a qualified service technician or your retailer.• This USB monitor is powered by USB port which complies with LPS and SELV circuit according to IEC60950-1:2005.
Care & cleaning• Cleaning. Turn your monitor off and unplug the power cord. Clean themonitor surface with a lint-free, non-abrasive cloth. Stubborn stainsmay be removed with a cloth dampened with mild cleaner.• Avoid using a cleaner containing alcohol or acetone. Use a cleanerintended for use with the LCD. Never spray cleaner directly on thescreen, as it may drip inside the monitor and cause an electric shock.The following symptoms are normal with the monitor:• You may find slightly uneven brightness on the screen depending onthe desktop pattern you use.• When the same image is displayed for hours, an afterimage of theprevious screen may remain after switching the image. The screen willrecover slowly or you can turn off the Power Switch for hours.• When the screen becomes black or flashes, or cannot work anymore,contact your dealer or service center to fix it. Do not repair the screenby yourself!Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
Where to find more informationRefer to the following sources for additional information and for productand software updates.1. ASUS websitesThe ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.Takeback servicesASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for our customers to be able to responsibly recycle our products, batteries and other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailrecycling information in different region.
1.1 Welcome!Thank you for purchasing the ASUS®USB monitor!The latest ASUS USB monitor provides great portability and simplicity to your daily life, enhancing both of your viewing experience and style.1.2 Package contentsCheck your package for the following items:
- USB Monitor
- Quick Start Guide
- CD-ROM
- Warranty Card
- USB 3.0 Cable
- Leather Case/Stand
. If any of the above items is damaged or missing, contact your retailerimmediately.
1.3 System requirementMinimum requirements:• Windows 7 with 1.4GHz Core 2 Duo• Mac OS X 10.6• 1GB RAMRecommended requirements:• Windows 7 with 2.4GHz Core 2 Duo or above• Mac OS X 10.6 or above• 2GB RAMVideo Playback Recommendations:• Windows Media Player(WMP)• CyberLink PowerDVD• Core WinDVD
1.4 Monitor introduction
1.4.1 Front view
1. Power Button/Power Indicator• Press this button to turn the monitor on or off.• The color of the power indicator defines as the below table.
2. Brightness Adjustment• Press this button to adjust brightness level.3. Micro B USB 3.0 Port
1.4.2 Auto-RotateOur USB monitor is equipped with G-sensor to detect its real-timeposition. The screen shot will automatically change from landscape toportrait position, or vice versa, depending on monitor’s current position.To disable, you can uncheck this function via ASUS Ezlink Utility.
. The Auto-Rotate function will not work under MAC OS or Windows XPenvironment.
2.1 Adjusting the monitor• For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.• You can adjust the monitor’s angle by two positions with leather case.• There are two strips for viewing angle adjustment. For upright position, use the far side strip from the top cover. For tilt-back position, use the other one instead.
2.2 Connecting the USB cableConnect one end of the USB cable to the monitor’s USB port, the otherend to your computer’s USB port
2.3 Installing driverThe USB monitor will work only when the included support-CD are installed properly. Before installation, please make sure the USB cable is connected between the USB monitor and the system.
Insert the included support-CD into your computer, the auto-run program will start to install the needed software and driver.
• The auto-run program only works under Windows Operation System.• Please check ASUS Support website for latest driver and software updates.
3.1 Specifications
| Model | MB169B+ |
| Panel Size | 15.6– (16:9, 39.62cm) wide screen |
| Resolution | 1920 x 1080 |
| Brightness (Typ.) | 200 cd/m2 |
| Contrast | 600:1 |
| Display Colors Digital Input | MIMECM=r
.11.11.11i |
| Colors | |
| Power Consumption | |
| Operating Temp. | MECIF |
| Phys. Dimension (WxHxD) | 379.1 x 235.8 x 8.5 mm |
| Box Dimension (WxHxD) Net Weight (Esti.) | |
| 0.8 kg | |
| Gross Weight (Esti.) | 2 kg |
| Regulation Approvals | UL/cUL, CB. CCC. EuP, BSMI. EAC(CU), RoHS, WEEE.J-MOSS, EMC. CE, FCC. KCC, VCCI, RCM. |
*Specifications are subject to change without notice.
3.2 Troubleshooting (FAQ)
| Problem Possible Solution |
| Power LED is not ON • Press the button to check if the monitor is
in the ON mode. · Check if the USB cable is properly connected to the monitor and the power outlet. The power LED lights amber • Check if the monitor and the computer are in and there is no screen image the ON mode. · Make sure the USB cable is properly connected between the USB monitor and the computer. · Inspect the signal cable and make sure none of the pins are bent. · Connect the computer with another available monitor to check if the computer is properly working. Screen image is too light or • Adjust the Brightness settings via the button. dark Screen image bounces or a • Make sure the USB cable is properly wave pattern is present in the connected between the USB monitor and the image computer. · Move electrical devices that may cause electrical interference. Screen image has color • Inspect the USB cable and make sure that defects (white does not look none of the pins are bent. white) |
References
[xyz-ips snippet=”download-snippet”]