ATEN VanCryst™VE811HDMI HDBaseT Extender Quick Start Guide
© Copyright 2017 ATEN® International Co., Ltd. ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights reserved. All other trademarks are the property of their respective owners. This product is RoHS compliant. Part No. PAPE-1223-I40G Printing Date: 06/2017
A. Hardware Review
B. Hardware Installation
VE811 Package Contents1 VE811 HDMI HDBaseT Transmitter1 VE811 HDMI HDBaseT Receiver2 Power Adapters1 User Instructions
VE811T Package Contents1 VE811T HDMI HDBaseT Transmitter1 Power Adapter1 User Instructions
VE811R Package Contents1 VE811R HDMI HDBaseT Receiver1 Power Adapter1 User Instructions
Support and Documentation NoticeAll information, documentation, fi firmware, software utilities, and specifi cations contained in this package are subject to change without prior notifi cation bythe manufacturer. To reduce the environmental impact of our products, ATEN documentation and software can be found online at http://www.aten.com/download/Scan formore information
Technical Supportwww.aten.com/support
EMC InformationFEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT:This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.FCC Caution: Any changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment, this equipment may cause radio interference.Warning: Operation of this equipment in a residential environment could cause radio interference. Suggestion: Shielded twisted pair (STP) cables must be used with the unit to ensure compliance with FCC & CE standards.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device mat not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
VE811 HDMI HDBaseT Extender
A Hardware Review
VE811T Front and Rear View1 Power jack2 HDBaseT output port3 Link LED4 Power LED5 Long Reach Switch6 F/W upgrade port7 HDMI input port
Troubleshooting
The Firmware upgrade port is reserved for tech support. If you would like to do fi rmware upgrade yourself, please contact your dealer.
VE811R Front and Rear View1 Power Jack2 HDBaseT input port3 HDMI out LED4 Link LED5 Power LED6 Long Reach Switch7 F/W upgrade port8 HDMI output port
B Hardware Installation
1 Connect the HDMI Input Port on the VE811T to the HDMI Output Port on your video source device using HDMI cable.2 Connect one end of the RJ-45 cable to the HDBaseT output port on the transmitter. Then connect the other end of the RJ-45 cable to the HDBaseT input port on the receiver.3 Connect the HDMI Output Port on the VE811R to the HDMI Input Port on your video display device using HDMI Cable.4 Plug the power adapter cable into the power jack on the VE811.Working in Long Reach ModeThe VE811 supports long reach mode. When this mode is applied, the maximum range can be enhanced to 150 meters at resolutions up to 1080p.www.aten.com
References
[xyz-ips snippet=”download-snippet”]