Attop A11 Mini Drone for Kids User Manual

All Operation Manual (Suitable for wide indoor environments operation)www.attoptoys.com Customer Service Email : [email protected]

MAJOR PARAMETERS
Main rotor diameter: 31mm	Body wide: 90mm
Body length: 90mm	Body height: 26mm
Full weight: 22.5g±2g	Main motor model: 06×15 4pcs
Gyroscope: Build-in	Charging time: about 30 min
Lifetime: 4minutes to 6minutes

Standard Accessories

Name of each part of the remote control

1. Take off / Landing button
2. Press down to enter the flip function
3. ON/OFF
4. Speed Adjustment
5. Rotate button
6. Calibration button
7. Press down to convert to standard mode

Name of each part of the aircraft

How to Change the propellers

– All drones have two rotors that spin clockwise and two rotors that spin counter-clockwise.– Make sure to place the propellers on the correct axis or they will not spin correctly and the drone will not lift– Each propeller is marked on its surface with A or B. There may be a number after the letter but you can ignore the number.– Make sure to follow the graphic as above to see where to place the propellers

Batte charging operation

Low ba tery warning When the drone is flying, the LED indicator on the drone flashes, and the remote control handle emit a “beer alarm sound, indicating that the drone power is too low. At this time, the drone needs to return and charge. Charging Guide for DroneStep. Connect the USB cable to the adapter.Step2. Connect the other end of a USB cable to the battery.Step3. Connect the adapter to the socket. If the LED light of the USB plug is on, the charging is completed. Otherwise, it means charging. Please use the drone when fully charged. Note: The connected USB Adapter should be less than or equal to 5V 2A, the voltage not be greater than 5V, otherwise there is a risk of overloading the USB cable. The flight time is about 5-6 minutes and the charging time is about 30 minutes.Simple instructions (Product default headless mode)

Simply instructions (Product default headless mode)Simply takeoff steps

A: Turn on the power of the drone, the LED is start flashing. Then place the drone on a flat surface with the head forward.

B: Turn on the power of remote, you will hear beeps from the remote. The LED of the drone is quick flashing and then breathing flashing means is pairing successfully.

E: Auto Hovening	C Press the Calibration button, the LED is quick flashing and then breathing flashing means is calibration completedD: Push the Left Control Stick up and release, now the propellers start rotating, then press One Key Take off button to take off

One Key Landing :

A Press the landing button andlandslow1y	B Landing on the ground, the motor stops rotating

One Key 360 degree rotation : 

A: Press the spin button	B: 360-degree rotation in the air Z”:.z

Speed Adjustment : 

Switch the speed button to change the speed gear while flying. There are 2 gears, switch the button to the left, you will hear”beep”, which means it is on first gear speed. Switch the button to the right, you will hear “beep, beep” means it is on second gear speed.Remark: Beginners would be suggested to use the first gear speed firstly to play until skillful.

Headless Mode : 

The default setting is Headless Mode. Press the right rocker vertically and you will hear “beep”, which means is cancel headless mode and convert to standard mode. And press again to convert to headless mode.LED to correspond to the state of mode Headless mode: Breathing. Standard mode: Steady.

Using the Remote Controller

One Key 360-degree flip function operation exercises

Step one

Fly the drone to a height over 6 feet, then press the Left Control Stick vertically to activate 360° Flip function. Next, move the Right Control Stick to flip the drone accordingly. Note: This function can’t be activated when the battery of the drone is low power.

Step two

Toss to staunch

After frequency matching and calibration finished, you can hold the aircraft in your hand, and then horizontally throw it out. The aircraft will automatically unlock the blades and fly in the air. Note: It is better to operate the calibration step again after operating Throw to fly for several times. The function will be more stable.

Safety Precautions

CAUTIONRemote control model DRONE, four-axis aircraft are dangerous goods, the flight must be away from the crowd. Improperly assembled or components damaged, poor electronic control equipment, and not being familiar with the operation may lead to flight out of control and other accidents. Please be sure to pay attention to flight safety, and need to understand the responsibility of any accident caused by negligence.CAUTIONFor indoor and outdoor special machines, please stay away from obstructions.

This remote control aircraft is suitable for indoor and outdoor (including outdoor wind is not greater than level 1), please select the free indoor and outdoor space, and with the crowd or pets to maintain an appropriate distance.Please operate in a safe situation too far away from heat, power, wire, etc., so as to avoid four-axis aircraft collision, forced landing, entanglement caused by fire, electric shock, and other dangers, and resulting in loss of life and property.

CAUTIONSafety of using lithium batteries

Li-po batteries are more dangerous than other batteries, please be sure to read and according to the following precautions before using the battery, the company will not be responsible for any damage caused by improper use.Never use the charger outside our factory to charge to avoid the risk of explosion fire. Do not impact, dismantle, positive and negative reverse, burning the battery, and avoid metal objects touching positive and negative. And please prevent sharp items from piercing the battery to avoid the risk of battery fire.

If the battery heat after use, please do not charge. Otherwise, it will cause the battery to expand, deformation, explosion and even fire burning, and harm the safety of life and property. Dispose of batteries, please strictly in accordance with the use of the country or region of the waste clean-up laws to recover, so as not to pollute the environment.CAUTIONKeeping away from the damp environment

The aircraft is composed of many sophisticated electronic components, it must prevent moisture or vapor, and avoid use in the bathroom or rain, in order to prevent vapor into the aircraft inside and prevent the breakdown of internal parts and electronic parts caused by unexpected accidents.CAUT1ONUsing the product correctly

Do not disassemble, modify, upgrade, and repair the aircraft. Please use the components in the catalog to ensure the safety of the structure. Be sure to operate within the product limits, do not overload, and do not use for illegal purposes.CAUT1ONSafety of using a dry battery

Please confirm the positive and negative position of the installation, old and new batteries do not mix at the same time to avoid affecting battery life. If you do not use this product for a long time, please remove the battery, so as to avoid battery leakage and failure. Do not use the battery if it leaks. Dispose of batteries in accordance with the waste disposal laws of the country or region, and do not discard them to avoid polluting the environment.