AUDACY Wall-Mount ON / OFF and Scene Switches Installation Guide

AUDACY Wall-Mount ON / OFF and Scene Switches

Models

  • WMS1200 WALL-MOUNT SWITCH,
  • WMS1201 ON/OFF SWITCH
  • WSS1200 SCENE SWITCH

INSTALLATION INSTRUCTIONS

Wall-Mount and Scene Switches for U.S. installations will fit into decorator-style faceplates and can be used to replace an existing switch in a standard box.

  1. As switches are installed remove one of the labels with the unique serial number and attach it to the Device Tracking Form included in the Appendix of the User Manual to record the location of each device.
  2. The switch must be activated by pressing a small recessed button on the back side of the switch.• This can be accomplished by using a small/precision screwdriver, the screw that is included with the switch, or similar object to push through the label and depress the switch.
  3. Remove existing switch and properly terminate any pre-existing wires.
  4. Push existing wires all the way to the back of the box.
  5. Use screws to secure the flush mounted switch to the electrical box.
  6. Cover with a decorator style faceplate.
  7. Peel & remove protective clear plastic finish protector.

SERIAL NUMBER DEVICE TRACKING

It is highly recommended to keep close track of all device barcodes. Instructions for ways to track are listed here:

  • Remove the 2 tear-away stickers that contain the serial number.
  • Apply these to a drawing of the space containing the fixture or a tracking sheet to identify the serial number and its location in the room (tracking sheet available in Appendix of User Manual).
  • If these tear away labels are missing, please write down the serial number of the Switch in a safe place.
  • The second label can be attached to the switch box for easy identification.
  • These serial numbers are required in order to have a fully functioning Audacy Wireless Lighting Controls system.

To configure scenes for the WSS1200 Scene Switch, refer to section 7.3 of the User Manual.FOR ANY ADDITIONAL CONCERNS:REFER TO THE DATA SHEETS ON AUDACYWIRELESS.COM, THE P-5302 USER MANUAL OR CALL/EMAIL CUSTOMER SERVICE.

1.800.273.9989[email protected]AUDACYWIRELESS.COM

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by