audio-technica ATM75cW Cardioid Condenser Headworn Microphones for Wireless System User Manual
Thank you for purchasing this product. Before using the product, read through the user manual to ensure that you will use the product correctly.Please keep this manual for future reference.
■ Features
- Ideal for drummers, keyboard players, guitarists or anyone requiring hands-free operation
- Low-visibility headband provides stable, comfortable fit
- Pivot-mounted flexible mic boom descends from left or right side
- Cardioid polar pattern improving isolation of desired sound source
- Rugged design and construction for reliable performance
- ATM75cW equipped with cW-style locking and equipped with ATM75cH cH-style screw-down 4-pin termination for Audio-Technica wireless systems
■ Notes on use
ATM75cW and ATM75cH wireless versions do not contain power module and includes clothing clip and metal-frame pop filter only. 1.4 m cable terminated with locking 4-pin connector. The connector is also compatible with Audio-Technica cW and cH type body-pack transmitters.For maximum stability and minimum visibility, the adjustable headband should be worn around the back of the head, with each cushioned support pad resting on the temple in front of the ear. The cable should remain clipped to the headband, with some slack at the boom connection.Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43°C for extended periods. Extremely high humidity should also be avoided.
■ Safety precaution
Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.
■ Cautions for the product
- Do not subject the product to strong impact to avoid malfunction.
- Do not disassemble, modify or attempt to repair the product.
- Do not handle the product with wet hands to avoid electric shock or injury.
- Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty place.
■ Specifications
- 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL*Typical, A-weighted, using Audio Precision System OneFor product improvement, the product is subject to modification without notice.
■ Polar pattern
■ Frequency response
■ Connection procedure
■ Cable Terminations
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan©2017 Audio-Technica CorporationGlobal Support Contact: www.at-globalsupport.com
16-NOV–2020 Form No.ATGC-L0383-20
References
[xyz-ips snippet=”download-snippet”]